There are 2575 products.
Carbon front upper plate for the MP10. Carbon allows lighter weight without sacrificing durability.
Handy multiuse case with a MINI-Z logo.
Comes with an internal tray with separating plates for flexible space arrangement.
It can also be used as a storage/protection box for an on-road type MINI-Z (see below for maximum dimensions).
Dimensions: approx. 201 x 108 x 52mm
Maximum MINI-Z size: approx. 187 x 95 x 48mm
Spare parts for the INFERNO MP9 TKI4 V2/MP9e Evo. V2 / can also be used for other 1/8 buggy.
Polycarbonate Wing with gold anodize Wing Holder for FANTOM EP 4WD. Improves rear tire grip by installing it, and stability of straight running and cornering at high speed range are also improved.
Front shock stay (5.0mm thick) for the INFERNO MP9 TKI4 V2/MP9e Evo. V2 Readyset
Optional parts for INFERNO MP10. Front Shock Stay for IF484 MS Shock set.
Changed the existing shock mounting hole position to upper side.
Allows a longer shock travel than standard, which improves the performance when landing of jumps and bumpy section.
●FH5U: SXR(SANWA XTREME RESPONSE) MODE-COMPATIBLE
●SSL-COMPATIBLE PROGRAMMABLE SERVO
# Compatible with CODE 10 (M12S, EXZES ZZ, MT-44)
Not Compatible with CODE 5 (M12, EXZES Z, MT-4S, MT-4, MT-S)
●PGS SETTING GEAR-COMPATIBLE
●SUPER RESPONSE (SSR) MODE-COMPATIBLE
●HIGH RESPONSE (SHR) MODE-COMPATIBLE
●Li-Po 2 CELL-COMPATIBLE
●LOW PROFILED
●HIGH SPEED TYPE
●BRUSH LESS MOTOR
●FULL ALUMINUM CASE
●FULL METAL GEAR (Strengthening Gears)
●AL HEAT SINK
●Black Harness
Optional parts for the Fazer MK2 and the FZ02. High precision machined servo saver. Improves the steering feel for accurate operation.
Option parts for INFERNO MP10T. Harder suspension arm than standard one to improve hardness. Setting parts according to road surface.
Engraved for identification.
CNC machinedC aluminum motor mount. Red anodied motor mount fits all Fazer Mk2 chassis
●FH5U: SXR(SANWA XTREME RESPONSE) MODE-COMPATIBLE
●SSL-COMPATIBLE PROGRAMMABLE SERVO
# Compatible with CODE 10 (M12S, EXZES ZZ, MT-44)
Not Compatible with CODE 5 (M12, EXZES Z, MT-4S, MT-4, MT-S)
●PGS SETTING GEAR-COMPATIBLE
●SUPER RESPONSE (SSR) MODE-COMPATIBLE
●HIGH RESPONSE (SHR) MODE-COMPATIBLE
●Li-Po 2 CELL-COMPATIBLE
●HIGH TORQUE TYPE
●BRUSH LESS MOTOR
●FULL ALUMINUM CASE
●FULL METAL GEAR (Strengthening Gears)
●AL HEAT SINK
●Black Harness
New 0 degrees hub carrier brass bushing inserts for the Inferno MP9 / 10. Increased durability and more weight to increase traction.
Reciver unit for the MINI-Z EVO chassis.
Supports the KT-531 and KT432PT transmitters.
Optional parts for the INFERNO MP10/MP9e Evo.
New setting weights by 10g and 20g which can be installed the main chassis.
Can be adjusted the weights in 10g/20g/30g/40g by weights combination.
Fixing by screws and nylon nut which prevents falling off when driving.
Spare parts for the TURBO OPTIMA. Optional parts for the OPTIMA and JAVELIN.
Reduces the weight of chassis by using lightweight titanium rods.
Improves steering response and suspension movement. Includes Upper Rods for Front & Rear, Steering Tie Rods and Steering Servo Rod, 7pcs in total.
Optional parts for the INFERNO MP9/MP10.
Currently line-up from 2.1mm to 2.8mm by 0.1mm difference. Add new item by 2.9mm to increase setting variety.
Popular easy to paint white color N0/+1.5/+2.5/+3.5、W0/W+1, two each included (N0 has 4 included) total 14 in set.
Spare parts for MP10
Front and rear lower suspension arms have been significantly reinforced for greater strength and also designed so they don’t catch dirt for easier cleaning and maintenance. The new arms are also substantially thicker around the large diameter φ4.5mm hinge pins to make the arms even more resilient.
Optional parts for MINI-Z
MR-03EVO, MA-030EVO A set of USB adapter HS and cable required when setting the chassis set with the I.C.S setting manager.
* Cannot be used for RWD, FWD, AWD, 4X4, and buggy ready set products.
●Exclusive Brushless Motor (censor type)
●Compatible with SSR
●Compatible with SSL
●Compatible with PROGRAM BOX Gen2 (optimal item)
●Achievement for 130% Output compare with Gen2 (previous model) due to Reviewing Design for Circuit Diagram
●Developed New Function for CODE 10 (SSL: Remote Transmitter Setting) for M12S, M12S-RS, EXZES ZZ, and MT-44.
●Increase Heat-Dissipation by Cooling Duct
●Update Firmware version by Program Box Gen2、etc.
