IGW001GM Al Front Hub...
Option Parts for INFERNO GT/GT2.
※IGW001 (Substitution parts)
There are 1522 products.
Option Parts for INFERNO GT/GT2.
※IGW001 (Substitution parts)
Aluminum knuckles. Provides increased rigidity and better appearance.
■Length 660mm
■Width 160mm
■Height 325mm
■Weight 1,530g approx.
■Motor 550-class G14L motor with water-cooling jacket
■propeller Size D31 x P1.4 (polycarbonate)
■Maximum Speed 21km/h approx.
■Operation time 5 minutes 30 seconds approx.
< Kit Contents >
●Pre-colored surf board installed with R/C system, complete with linkages
●Complete pre-painted surfer figure
●KT-231P+2.4GHz 2ch pistol grip type transmitter
●7.2V-22HV NiMH battery
●Ni-MH battery dedicated delta peak USB charger
●Styrofoam slipway
●Spare ladder
< Required for Operation >
●AA batteries x 4 for transmitter
Spare parts for the IFW602. Includes 30mm small high power cooling fan with extension cord for Inferno MP10e.
Clamp Type Rear Wheel Hub for the FANTOM EP 4WD. Lightweight gold anodized hub & collar set. Prevents damage to shaft due to core deviation and screws.
Spare parts for the MAD CRUSHER / FO-XX. Updated version of MA002. Cannot be used with MA004F / MA004R. Must use together with MA353 and MA355/MA356.
■Length 595mm
■Width 220mm
■Height 350mm
■Weight 1,600g approx.
■Transmitter KT-231P+
■ESC KYOSHO SPEED HOUSE
KA060-91W
■Servo KS4031-06W
■Motor 550-class G14L motor with water-cooling jacket
■Battery 7.2V-2200mAh NiMH
■Compatible battery size L148xW52xH30mm or less
■Charger Ni-MH battery dedicated USB charger
■Propeller D31xP1.4 (Polycarbonate)
■Maximum speed 24km/h approx.
■Operation time 5 min approx.
■Length 595mm
■Width 220mm
■Height 350mm
■Weight 1,600g approx.
■Transmitter KT-231P+
■ESC KYOSHO SPEED HOUSE
KA060-91W
■Servo KS4031-06W
■Motor 550-class G14L motor with water-cooling jacket
■Battery 7.2V-2200mAh NiMH
■Compatible battery size L148xW52xH30mm or less
■Charger Ni-MH battery dedicated USB charger
■Propeller D31xP1.4 (Polycarbonate)
■Maximum speed 24km/h approx.
■Operation time 5 min approx.
Option parts for INFERNO MP9/MP10 series. Necessary to use together with IFW618 and IFW619 as a set. Improves the throttle feeling to change the secondary reduction ratio (43T / 13T → 42T / 12T).
■Length 200.5mm
■Width 87mm
■eight 86.0mm
■Chassis Type MX-01
■Wheel Base 110mm
■Tread F/R:72.7mm
■Weight 223g (excl. battery)
■Motor/Engine 130 Class
■Gear Ratio 55.44:1/30.80:1/46.20:1
27.72:1/39.60:1/34.65:1
■Front Tire Diameter Φ42.0mm
■Rear Tire Diameter Φ42.0mm
■Front Tire Width 14.3mm
■Rear Tire Width 14.3mm
■Battery 4 x AAA alkaline
■Transmitter Syncro KT-531P
■Speed Approx. 3.3km/h〜6.6km/h (Pinion gears 10T〜 20T)
■Running Time Approx. 60 mins
■Length 200.5mm
■Width 87mm
■eight 86.0mm
■Chassis Type MX-01
■Wheel Base 110mm
■Tread F/R:72.7mm
■Weight 223g (excl. battery)
■Motor/Engine 130 Class
■Gear Ratio 55.44:1/30.80:1/46.20:1
27.72:1/39.60:1/34.65:1
■Front Tire Diameter Φ42.0mm
■Rear Tire Diameter Φ42.0mm
■Front Tire Width 14.3mm
■Rear Tire Width 14.3mm
■Battery 4 x AAA alkaline
■Transmitter Syncro KT-531P
■Speed Approx. 3.3km/h〜6.6km/h (Pinion gears 10T〜 20T)
■Running Time Approx. 60 mins
MINI-Z FWD main chassis equipped with gold plated battery termials, which have lower electric resistance.
Option parts for the INFERNO MP9 / MP10.
Whole set for clutch parts. Easy to purchase some necessary clutch parts when preparing the spare engine.
Light weight 2.5mm and 2.0mm suspension plates. Compared to the stock aluminum plates the carbon fiber plates are 2g lighter and with the same durability.
Aluminum shock set for Fazer MK2 TC chassis.
Includes 2pcs soft springs of #FAW224.
Allows a stable damping force than plastic shocks and fine setting is available with smooth function.
Dial type of height adjustment applys for various range of road surface conditions.
Spring set is softer and 0.5mm shorter than MZW401. Delivers superior performance when combined with MZW415 aluminum upper arm and MZW416 inner tube shock. Includes 5 types.
Maintains smooth drive transmission and bend resistance, even in hard crashes.
Knuckle set for changing rear camber. 3 angle types.
■MDW005-15 / MDW005-30 / MDW005-45
Separate type clutch shoe is included with the Readyset.