There are 2521 products.
Active filters
Unidirectional edge pattern high-grip tires. Realizes exceptional grip, not just on urethane, but also on carpet surfaces.
■MZW37-20 / MZW37-30 / MZW37-40
Spring set for adjusting hardness of rear suspension. Includes 3 different hardness types.■Length：23mm
Spare parts for MP10
Increased durability and reliability is achieved with larger φ4.5mm diameter inner hinge pins compared to the φ4.0mm hinge pins on the MP9 TKI4.
■Length 398mm
■Width 236mm
■Height 165mm
■Wheelbase 263mm
■Tread (F/R) 198mm / 195mm
■Tire(F/R) 75×20mm / 85×41mm
■Gear Ratio H setting 6.9:1 L setting 8.3:1 (2 combinations included)
■Weight 1,040g approx. (w/out R/C system & battery)
■Motor 540-class (sold separately)
■Length 163mm
■Width 105mm
■Height 46mm
■Wheelbase 115mm
■Tread（Ｆ/Ｒ） 89mm/89mm
■Tires（Ｆ/Ｒ） φ37×13.5mm／φ37×18.5mm
■Weight 200g approx.
■Motor SPEED HOUSE XSPEED 85 (8500KV)
<Set Contents>
●Factory assembled MB-010VE chassis installed with XSPEED VE brushless motor.
●Pinion gears x 3 (11T, 13T, 15T)
●Spur gears x 2 (33T, 35T)
●Wheel wrench
●Pinion gear tool
●Pairing stick
●Spare wheel nuts
<Required for Operation>
●KT531P transmitter
●Paint for body
●4 x AAA alkaline or Ni-MH batteries for chassis
●4 x AAA alkaline batteries for transmitter (EX-5UR ASF requires 8 x AA alkaline batteries)
Optional parts for the INFERNO MP10.
By covering the joint part of the universal swing shaft with an aluminum cap, it has the effect of preventing splashing of grease and improved durability, as well as protecting a damage from dust.
It also protects the pins from falling off in case of damaging the joint parts.
■Length 398mm
■Width 236mm
■Height 145mm
■Wheelbase 263mm
■Tread (F/R) 198mm /195mm
■Tire(F/R) 75×20mm / 85×41mm
■Gear Ratio H setting 6.9:1 L setting 8.3:1 (2 combinations included)
■Weight 985g approx.(w/out R/C system & battery)
■Motor 540-class
*Autoscale alone cannot run. Also, some bodies cannot be mounted on certain chassis.
*The separately sold LED light unit set (No. MZW429R) can be installed on the Toyota Sprinter Trueno AE86.
■Length 450mm
■Width 195mm(Body width:196mm)
■Height 136mm
■Chassis Height 8mm(approx.)
■Wheelbase 260mm
■Tread (F/R) 167mm
■Tires (F/R) φ64×27.7mm
■Gear Ratio 6.54：1
■Weight 1650g (approx.)
■R/C system &; Syncro KT-231P+
■Motor G14L
<Kit Contents>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts
<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools
Spare parts for MP10
Based on the suspension geometry of the MP9 TKI4 shock stay, the number of shock and upper arm mounting holes has been optimized. In addition, the reinforced rear shock stay delivers increased strength and prevents dirt catching.
95mm Shock Spring for INFERNO MP10/MP10T/MP10e/MP9. It is necessary for Buggy to use together with IFW624 HD Rear Shock Stay.
95mm Shock Spring for INFERNO MP10/MP10T/MP10e/MP9. It is necessary for Buggy to use together with IFW624 HD Rear Shock Stay.
Realizes more consistent braking due to special material of brake pad and unique glued method between plate and pad.
Optional parts for the INFERNO MP9 Series.
Hard type wheel of existing IFH006 Dish Wheel.
It tends to have a stable running when exiting corner and acceleration.
You can select the wheel depending on racing track and you wish.
■Length 126mm
■Width 65mm
■Height 34mm
■Wheelbase 94（L）～98（LL）mm
■Tred (F/R) 65～76mm／65～76mm
■Tire (F/R) Φ25.0×8.5 mm／Φ25.0×8.5、11 mm（sold separately）
■Gear Ratio 6.4 / 6.0 / 5.7 / 5.3 / 5.0 / 4.5 : 1
■Weight 135g (approx.)
■Motor KYOSHO SPEED HOUSE XSPEED 85 (KV8500)
＜SET CONTENTS＞
●Factory-assembled chassis equipped with EVO main unit installed
●Pinion Gears (15T, 17T, 19T, 21T)
●Pinion gear removal tool
●Spare wheel nuts
●Wheel wrench
●Center shaft for L wheelbase
●Spur gears (27T / 29T / 31T)
●EVO2 compatible transmitter
●EVO2 compatible receiver unit
●Auto Scale Collection (body, wheels and tires)
●AAA-size alkaline batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for transmitter
Softer front lower suspension arms for the MP10/10e. Forgiving and withstands impacts with the softer material. Suitable for rough tracks.
Setting parts for the INFERNO MP10.
Improved rigidity and strength by adding ribs for front suspension arm.
Optional front springs for the MP10/MP10e. Thicker and more coil turn allowing stiffer characteristics. Best for high speed and high traction surfaces.
New light weight 46T spur gear for use with smaller diff for the center(Same as front and rear diff). By using the smaller diff, accelaration will be quicker and smoother. Smoother deaccelaration can also be achieved. This spur gear is design to fit the smaller diff case replacing the stock diff housing which is larger. Requires the use of IF403B Diff case set. Compatible with MP10/9 series.
Optional parts for the INFERNO MP9/MP10.
Currently line-up from 2.1mm to 2.8mm by 0.1mm difference. Add new item by 2.9mm to increase setting variety.
■Length 395mm
■Width 244mm
■Height 120mm
■Wheelbase 260mm
■Front Tread 208mm
■Rear Tread 208mm
■Weight 1,600g (approx.)
■Tires (F/R) φ82×36mm
■Motor 540 class size (sold separately)
■Gear ratio 9.24 : 1
■Length: 395mm
■Width: 240mm
■Height: 120mm
■Ground Clearance: 36mm
■Wheelbase: 260mm
■Tread (F/R): 204mm / 204mm
■Tire(F/R): 86f x 40mm / 86f x 40mm
■Gear Ratio: 9.24:1
■Weight: approx. 1,600g
■Motor: 540 class size
■Battery: Ni-MH / Li-PO ?Li-PO: Standard Size / short size
■R/C System: 2 channel, 1-servo, ESC
■Length 408mm
■Width 256mm
■Height 145mm
■Wheelbase 273mm
■Tread (F/R) 218mm/215mm
■Tire(F/R) Φ82×27mm / Φ86×42mm
■Gear Ratio 6.9 : 1 / 8.3 : 1 (select from 2-type)
■Weight 1,500g (approx.)
■Motor 540-type (sold separately)
