There are 2656 products.
Active filters
MZW37-30 MINI-Z Racing...
Unidirectional edge pattern high-grip tires. Realizes exceptional grip, not just on urethane, but also on carpet surfaces.
■MZW37-20 / MZW37-30 / MZW37-40
Price
$13.24
MZW202 Rear Spring...
Spring set for adjusting hardness of rear suspension. Includes 3 different hardness types.■Length：23mm
Price
$12.22
IF624-69 HD Sus. Shaft...
Spare parts for MP10
Increased durability and reliability is achieved with larger φ4.5mm diameter inner hinge pins compared to the φ4.0mm hinge pins on the MP9 TKI4.
Price
$14.26
30614 Kyosho BEETLE 2014...
■Length 398mm
■Width 236mm
■Height 165mm
■Wheelbase 263mm
■Tread (F/R) 198mm / 195mm
■Tire(F/R) 75×20mm / 85×41mm
■Gear Ratio H setting 6.9:1 L setting 8.3:1 (2 combinations included)
■Weight 1,040g approx. (w/out R/C system & battery)
■Motor 540-class (sold separately)
Price
$396.27
- New
32294 MINI-Z Buggy VE2.0 SP...
■Length 163mm
■Width 105mm
■Height 46mm
■Wheelbase 115mm
■Tread（Ｆ/Ｒ） 89mm/89mm
■Tires（Ｆ/Ｒ） φ37×13.5mm／φ37×18.5mm
■Weight 200g approx.
■Motor SPEED HOUSE XSPEED 85 (8500KV)
<Set Contents>
●Factory assembled MB-010VE chassis installed with XSPEED VE brushless motor.
●Pinion gears x 3 (11T, 13T, 15T)
●Spur gears x 2 (33T, 35T)
●Wheel wrench
●Pinion gear tool
●Pairing stick
●Spare wheel nuts
<Required for Operation>
●KT531P transmitter
●Paint for body
●4 x AAA alkaline or Ni-MH batteries for chassis
●4 x AAA alkaline batteries for transmitter (EX-5UR ASF requires 8 x AA alkaline batteries)
Price
$369.00
IFW613B HD Cap U-Swing...
Optional parts for the INFERNO MP10.
By covering the joint part of the universal swing shaft with an aluminum cap, it has the effect of preventing splashing of grease and improved durability, as well as protecting a damage from dust.
It also protects the pins from falling off in case of damaging the joint parts.
Price
$97.78
30613 Kyosho SCORPION 2014...
■Length 398mm
■Width 236mm
■Height 145mm
■Wheelbase 263mm
■Tread (F/R) 198mm /195mm
■Tire(F/R) 75×20mm / 85×41mm
■Gear Ratio H setting 6.9:1 L setting 8.3:1 (2 combinations included)
■Weight 985g approx.(w/out R/C system & battery)
■Motor 540-class
Price
$365.71
RX-482 Receiver 2.4GHz...
| Frequency |
2.4GHz FHSS4 |
Channel |
4ch |
| Nominal Input Voltage |
3.7V～7.4V |
Dimensions |
18.2x24.4x27.1mm |
| Weight |
7.1g |
Compatible radio |
M12, Exzes Z, MT-4S, MT-4(No SSL support) |
Price
$130.19
MZP479ID ASC MA020 Toyota...
*Autoscale alone cannot run. Also, some bodies cannot be mounted on certain chassis.
*The separately sold LED light unit set (No. MZW429R) can be installed on the Toyota Sprinter Trueno AE86.
Price
$124.00
34425T1 1/10 Scale Radio...
■Length 450mm
■Width 195mm(Body width:196mm)
■Height 136mm
■Chassis Height 8mm(approx.)
■Wheelbase 260mm
■Tread (F/R) 167mm
■Tires (F/R) φ64×27.7mm
■Gear Ratio 6.54：1
■Weight 1650g (approx.)
■R/C system &; Syncro KT-231P+
■Motor G14L
<Kit Contents>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts
<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools
Price
$352.23
IF604 Hard Front Shock...
Spare parts for MP10
Based on the suspension geometry of the MP9 TKI4 shock stay, the number of shock and upper arm mounting holes has been optimized. In addition, the reinforced rear shock stay delivers increased strength and prevents dirt catching.
Price
$101.87
- New
PL2207 LIPO GLOW IGNITOR...
1. High-tech regulator application, output voltage is 1.5V
2. Switching transfer with low heat dissipation
3. Large LCD shows battery status
4. Including Li-Po 1S 1200mAh battery (easily charged with additional micro USB lead)
5. Convenient, economical, pistol-sized design
6. Fits any glow plugs within new 4-cycle plugs
Price
$53.90
IFS004-10514 Big Shock...
95mm Shock Spring for INFERNO MP10/MP10T/MP10e/MP9. It is necessary for Buggy to use together with IFW624 HD Rear Shock Stay.
Price
$28.52
IFS004-1114 Big Shock...
95mm Shock Spring for INFERNO MP10/MP10T/MP10e/MP9. It is necessary for Buggy to use together with IFW624 HD Rear Shock Stay.
Price
$28.52
IFW473 Brake Pad (MP9)
Realizes more consistent braking due to special material of brake pad and unique glued method between plate and pad.
Price
$38.71
IFH006WH Hard Dish Wheel...
Optional parts for the INFERNO MP9 Series.
Hard type wheel of existing IFH006 Dish Wheel.
It tends to have a stable running when exiting corner and acceleration.
You can select the wheel depending on racing track and you wish.
Price
$36.67
32181 MINI-Z AWD MA-030EVO2...
■Length 126mm
■Width 65mm
■Height 34mm
■Wheelbase 94（L）～98（LL）mm
■Tred (F/R) 65～76mm／65～76mm
■Tire (F/R) Φ25.0×8.5 mm／Φ25.0×8.5、11 mm（sold separately）
■Gear Ratio 6.4 / 6.0 / 5.7 / 5.3 / 5.0 / 4.5 : 1
■Weight 135g (approx.)
■Motor KYOSHO SPEED HOUSE XSPEED 85 (KV8500)
＜SET CONTENTS＞
●Factory-assembled chassis equipped with EVO main unit installed
●Pinion Gears (15T, 17T, 19T, 21T)
●Pinion gear removal tool
●Spare wheel nuts
●Wheel wrench
●Center shaft for L wheelbase
●Spur gears (27T / 29T / 31T)
●EVO2 compatible transmitter
●EVO2 compatible receiver unit
●Auto Scale Collection (body, wheels and tires)
●AAA-size alkaline batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for transmitter
Price
$299.00
IF625SSC Front Lower Sus....
Softer front lower suspension arms for the MP10/10e. Forgiving and withstands impacts with the softer material. Suitable for rough tracks.
Price
$28.51
IF625SC HD Front Lower Sus....
Setting parts for the INFERNO MP10.
Improved rigidity and strength by adding ribs for front suspension arm.
Price
$28.51
IFS006-1116 Big Shock...
Optional front springs for the MP10/MP10e. Thicker and more coil turn allowing stiffer characteristics. Best for high speed and high traction surfaces.
Price
$28.26
IFW634-46S Light Weight...
New light weight 46T spur gear for use with smaller diff for the center(Same as front and rear diff). By using the smaller diff, accelaration will be quicker and smoother. Smoother deaccelaration can also be achieved. This spur gear is design to fit the smaller diff case replacing the stock diff housing which is larger. Requires the use of IF403B Diff case set. Compatible with MP10/9 series.
Price
$64.59
IFB023H Body (MP10...
New 1mm body for the MP10 and MP10TKI2. 1.0mm PC body is more durable and long lasting then the 0.8mm body.
Price
$73.35
SWSGS02 SGS-02 Gyro SXR...
・AL case
・Compatible with SXR
・New Function: Quick-ST
・Compatible with setting by MULTI-SETTING GEAR
Price
$100.85
