There are 2666 products.
Active filters
MZP481CS ASC MA020N Toyota...
※It is not possible to drive with auto scale alone. In addition, some bodies cannot be mounted depending on the chassis.
※The separately sold LED light unit set (No.MZW429R) cannot be installed on the Toyota CELICA TURBO 4WD No.2 WRC 1992.
Price
$116.00
MZP347TQ ASC MR04W-LM...
※It is not possible to drive with auto scale alone. In addition, some bodies cannot be mounted depending on the chassis.
※The separately sold LED light unit set (No.MZW429R) cannot be installed on the Porsche 962 C Coupe LH No.7 LM 1987.
Price
$124.00
32363TQ MINI-Z RWD MR-04...
■Length 178.0mm
■Width 78.0mm
■Height 40.0mm
■Chassis MR-04W-LM
■Wheelbase 102.0mm （3L）
■Tread F:66.5mm R:65.0mm
■Front Wheel Offset Narrow +2.5mm
■Rear Wheel Offset Wide +1.0mm
■Weight 130g
■R/C System Syncro KT-531P
<Readyset Contents>
●Factory assembled chassis
●Pre-painted body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Pinion gears 6T, 7T, 8T, 9T
●Spare nuts
●Wheel wrench
●Pinion gear tool
●Tires, wheels
<Required for Operation>
●AAA-size alkaline batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for transmitter
Price
$279.00
MZP246RGB ASC MR04W-MM ASC...
※It is not possible to drive with auto scale alone. In addition, some bodies cannot be mounted depending on the chassis.
※The separately sold LED light unit set (No.MZW429R) cannot be installed on the Audi R8 LMS 2016 “Gray/Red”.
Price
$116.00
92213B Fuel Tube(2.4x6x1000mm)
For filling out the Fuel Pump. Prevent fuel from spilling. ※2. 4×6×1000mm
Price
$20.37
KOS-PK01BG KYOSHO Box Logo...
Kyosho logo embroidered soft parker with brushed lining for high heat retention
From the RC track to the casual urban scene, this parker fits in anywhere. Made by ‘Glimmer’ in a slightly thicker 10.0 oz 85% polyester + 15% cotton blend (ribs are 97% polyester + 3% polyurethane), excellent quick-drying properties ensures quick drying after washing. With fleece lining and a double hood, you’ll be warm and comfortable, and in good style.
※ Due to manufacturer product specifications, the size is slightly smaller than other products, for example a size (M) in other products corresponds to S, (L) corresponds to M, and (LL) corresponds to L. Please check the actual size chart before purchasing.
※ Due to manufacturer product specifications, the size is slightly smaller than other products, for example a size (M) in other products corresponds to S, (L) corresponds to M, and (LL) corresponds to L. Please check the actual size chart before purchasing.
Price
$75.69
OSB21ADC3 O.S. Speed B21...
Combo Set(TB02 EFRA2089(T2090)+MB01-75(M2000SC)
Spec---------------------------
Displacement： 3.49cc / 0.213 cu.in.
Bore: 16.4mm / 0.646 in.
Stroke: 16.55mm / 0.652 in.
Output 2.65 ps / 2.61 hp / 34,000 r.p.m.
Practical RPM range: 4,000-42,000 r.p.m.
Engine Weight: 350g / 12.35oz
Price
$549.00
97054-4C LED Light Unit...
4 light clear LED light set. Connects to the Rx open slot and includes extention cords for additional light sets.
Price
$28.00
LRP71145 LRP 5000MAH 7.2V...
Features
- High-Power Racing Stickpack
- Higher cycle capability
- Improved quality and more power
- Best value for money
- Ready-to-use complete with US-style connectors
- Fast charge enabled
- Exclusive LRP single cells
- Large application area
- 2.5mm² silicone power wire
- Tested LRP quality, e.g. endurance-tested over 400 continuous charge and discharge cycles
Price
$70.29
- New
- New
- New
- New
- New
- New
- New
- New
- New
FP10PXRE Futaba 10PXR...
High-end model with top-speed response function
The T10PX, a favorite among many top drivers, has finally arrived with the "R" designation. The meticulously crafted "T10PXR" symbolizes evolution for competing on a new stage. ★The T10PXR is a transmitter compatible with "F-4G", "T-FHSS SR", "T-FHSS", "S-FHSS", and "MINI-Z". ★The R404SBS and R404SBS-E are receivers compatible with "F-4G".
Price
$959.00
MZP259BT ASC MR04W-MM ASC...
※It is not possible to drive with auto scale alone. In addition, some bodies cannot be mounted depending on the chassis.
※The separately sold LED light unit set (No.MZW429R) cannot be installed on the Audi R8 LMS Phoenix Racing NBR 2010 #98.
Price
$116.00
FAW310 Adjustable Aluminum...
1/10 RWD. Optional parts for the drift car FAZER D2.
The standard servo horn is made of resin, but by using machined aluminum, the response and holding power of the steering have been greatly improved.
Additionally, the steering feel can be adjusted by changing the distance between 17mm and 21mm.
FAW310 is for Kyosho and Futaba, while FAW311 is for Sanwa and KO.
Price
$40.00
MZP475MB ASC MA-020 NISSAN...
※This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.
※The separately sold LED light unit set (No.MZW429R) can be installed on the NISSAN Fairlady 240Z-L Tuned Ver.
Price
$116.00
FAW226 TC Carbon Bumper...
Carbon bumper brace for FZ02 / 02L chassis. Supports bumper and increases chassis rigidity.
Price
$38.35
EFW011 Main Chassis w/CF...
FRP main chassi and carbon front upper plate. More rigid flex allows more responsive steering.
Price
$109.00
EFW010 Carbon Upper...
Carbon upper deck. More rigid than the FRP version allowing less flex and roll. Great for high traction surface.
Price
$92.85
OTH248YB 2.2 Dish...
2.2 inch rear wheel with offset suitable for vintage buggy chassis.
Used when using 2.2 inch tires.
38mm width.
<Compatible chassis> *2.2 inch tires are required for each vehicle.
No.30617 Optima
No.30618 Javelin
No.30619 Turbo Optima
No.30622 Optima Mid
No.30625 Ultima
Price
$18.33
MXW004 Brass Rear Axle Cap
Machined brass rear axle cap. Increases the weight distribution on the rear wheels for improved downhill performance.
Price
$30.28
IFW634-47S Light Weight...
Optional parts for INFERNO MP10 series and MP9 series. Light weight 47T spur gear for use with smaller diff for the center(Same as front and rear diff). By using the smaller diff, acceleration will be quicker and smoother. Smoother deceleration can also be achieved. This spur gear is design to fit the smaller diff case replacing the stock diff housing which is larger. Requires to use with IF403B Diff case set.
Price
$64.59
MZP243OR ASC MR-03W-MM...
※It is not possible to drive with auto scale alone. In addition, some bodies cannot be mounted depending on the chassis.
※The separately sold LED light unit set (No.MZW429R) cannot be installed on the McLaren Senna GTR.
Price
$117.07
MZP451BL ASC MA020N DODGE...
Exquisite finish and realistic appearance. A complete body series that can be enjoyed as a high-quality display that provides the joy of decorating.
* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.
Price
$118.17
IFW632 Carbon Rear Shock...
Carbon Rear shock tower for the MP10 / MP10 TKI2 / MP10e. Designed to use with MP10TKI2 long shocks. Light weight and durable carbon allows lower CG. The slightly more flex feel allows a different feel than the aluminum shock towers. A great setup option for various tracks.
Price
$138.54
MA358 Rear C-Universal...
Spare center rear universal swing shaft for the USA-1. Compatible with the Mad Crusher / FO-XX series.
Price
$48.90
MZW429R-01 Forked connector...
A connector that allows the LED light unit (MZW429R) to be installed in double.
* MZW439R for ICS connector is not supported.
Price
$16.30
MXTH002HW...
A pair of pre-glued tires and wheels assembled with a weight inside. Using on the front ensures excellent traction for hill climbing.
Price
$44.82
MXW001R Aluminum Link Rod...
Stunning red anodized aluminum link rods for better appearance. For 110mm wheelbase.
Price
$40.75
UTW001 CNC Motor Plate...
CNC machined motor mount for Ultima. High processing accuracy and improves cooling effect by fin shape. Gunmetallic anodized finish for dress up.
Price
$65.20
UTW002 Carbon Front Shock...
CNC machined front shock stay for the Ultima. Using a hybrid material in which FRP is sandwiched with carbon, proper hardness to improve durability.
High machining accuracy and rigidity shock stay allows suitable setting of shock.
Price
$36.67
UTW003 Carbon Rear Shock...
CNC machined rear shock stay for the Ultima. Using a hybrid material in which FRP is sandwiched with carbon, proper hardness to improve durability.
High machining accuracy and rigidity shock stay allows suitable setting of shock.
Price
$44.82
FAW221 ST Ball in out Tool...
Optional parts for the Fazer MK2 and the FZ02. Convenient tool when installing and removing front hub ball. The ball can be installed straight by tightening the cap screw without damaging the ball, as well as easy removing. Also useful when changing from nylon ball to optional the FAW218 HD ST ball.
Price
$5.09
FAW204 HD Wheel Hub...
Optional parts for the Fazer MK2 FZ02L-B (Rage 2.0). Durable wheel hubs.
Price
$77.42
