Futaba R203GF (S-FHSS) 2.4G...
S-FHSS/FHSS (Auto Detection)
SIZE:
39 mm x 26 mm x 10 mm
1.54 in x 1.02 in x 0.39 in
WEIGHT:
8 g
0.28 oz
OPERATING VOLTAGE:
DC 4.8V-7.4V
There are 94 products.
Active filters
S-FHSS/FHSS (Auto Detection)
SIZE:
39 mm x 26 mm x 10 mm
1.54 in x 1.02 in x 0.39 in
WEIGHT:
8 g
0.28 oz
OPERATING VOLTAGE:
DC 4.8V-7.4V
1. High-tech regulator application, output voltage is 1.5V
2. Switching transfer with low heat dissipation
3. Large LCD shows battery status
4. Including Li-Po 1S 1200mAh battery (easily charged with additional micro USB lead)
5. Convenient, economical, pistol-sized design
6. Fits any glow plugs within new 4-cycle plugs
Voltage - 7.4V
C-rate - 50C
Style - Hardcase
Connector - T-Plug
Balancing connector - XH
Length - 138.00mm
Width - 46.00mm
Height - 25.00mm
Weight - ~310g
Capacity - 5900mAh
1. New generation fuel pump with compact size
2. Double injection; using TPR material that has a comfortable feel
3. Improved gear mesh and make the large flow rate 18cc/sec
4. Advanced pump unit design; glow fuels and gasoline are both compatible
5. Includes filter fuel nozzle and 19” silicon fuel tubing
Combo Set(TB02 EFRA2089(T2090)+MB01-75(M2000SC)
Spec---------------------------
Displacement: 3.49cc / 0.213 cu.in.
Bore: 16.4mm / 0.646 in.
Stroke: 16.55mm / 0.652 in.
Output 2.65 ps / 2.61 hp / 34,000 r.p.m.
Practical RPM range: 4,000-42,000 r.p.m.
Engine Weight: 350g / 12.35oz
Cell chemistry - LiPo HV
C-rate - 120C/60C
Length - 139.0mm
Width - 47.0mm
Height - 17.5mm
Weight - 215g (+/-4%)
Connectors - 5mm
Homologated - ROAR, EFRA, BRCA
Weight-90g
Nominal voltage-7.4V
C-rate-RX-only
Dimensions-84x30x17mm
Capacity-2500
Balancing connector-XHR 3-pole
Spec:
Nominal voltage - 7.6V
C-rate - 45C
Style - Hardcase
Connector - US-Style
Balancing - connectorXH
Application - On/Offroad
Length - 137mm
Width - 47mm
Height - 25mm
Weight - 352g
Capacity - 9000mAh
■ Combo set
TT02 EFRA2690 (T-1080SC L52) & MT02
・Plug P4 turbo plug ・Dust cap set 3mm (1 piece) 16mm (2 pieces) ・Exhaust seal ring
1. New generation fuel pump with compact size
2. Double injection; using TPR material that has a comfortable feel
3. Improved gear mesh and make the large flow rate 18cc/sec
4. Advanced pump unit design; glow fuels and gasoline are both compatible
5. Includes filter fuel nozzle and 19” silicon fuel tubing
The very first Antix by LRP product gets an update. Already known from high-end Competition LiPo batteries, the HV-LiPo GRAPHENE battery cell technology now also gained entry into our high-quality budget Antix by LRP LiPo battery line.
The Antix by LRP GRAPHENE cells enable charging up to 8.7V (2S), greatly increasing the power output and runtime. The batteries are still fully compatible to all 8.4V
chargers. If you are charging them only to 8.4V two good things will happen to you. Firstly, the batteries will have a highly improved lifetime. Secondly, the batteries will still have a significantly higher power output at 8.4V charging compared to the 2016 line without GRAPHENE cells.
Displacement: 3.49cc / 0.213 cu.in.
Bore: 16.08mm/0.633in.
Stroke: 17.20mm/0.677in.
Output 2.8ps/2.76hp/35,000r.p.m
Practical r.p.m.Range: 4,000-45,000 r.p.m.
Weight: 340g / 11.99oz
Spec---------------------------
Displacement: 3.49cc / 0.213 cu.in.
Bore: 16.27mm / 0.646 in.
Stroke: 16.80mm / 0.661 in.
Output 2.68 ps / 2.64 hp / 34,000 r.p.m.
Practical RPM range: 4,000-42,000 r.p.m.
Engine Weight: 345g / 12.17oz
LiPo power at a budget price from ANTIX by LRP.
These RC car LiPos are ideal for hobby and amateur drivers looking for power and durability at a budget price.
The special "stickpack" shape is based on the NiMh packs for which many chassis were designed.
Also for the new release of vintage models you get perfectly fitting batteries of the latest technology with 134mm length and additionally slightly offset cable exit, so the battery posts of your chassis do not get in the way.
Equipped with a robust hard case, these 2S LiPo batteries are suitable for tough On- and Offroad use.
Specs ---------------------------
Stroke volume: 3.49 cc / 0.213 cu.in.
Bore: 16.27mm / 0.641 in.
Stroke: 16.80 mm / 0.661 in.
Output: 2.68 ps / 2.64 hp / 34,000 rpm
Practical rotation speed: 4,000-42,000 rpm
Weight: 352 g / 12.42 oz.
Standard accessory
T plug T-P3 1 piece
Reducer φ6Ⅱ, φ6.5Ⅱ
Exhaust seal ring 1 piece
OS SPEED Dust cap set 12-30 ・ φ3, φ16, φ18 1 each
Spec.---------------------------
Displacement: 3.49cc / 0.213 cu.in.
Bore: 16.4mm / 0.646 in.
Stroke: 16.55mm / 0.652 in.
Output: 2.65 ps / 2.61 hp / 34,000 r.p.m.
Practical r.p.m.Range: 4,000-42,000 r.p.m.
Weight: 362g / 12.77oz