There are 1461 products.
Greatly suppresses vibration and instability of steering control. Increases stability during high speed cornering, acceleration and braking.
■Length 193mm
■Width 84mm
■Height 90.0mm
■Chassis Type MX-01
■Wheel Base 120mm
■Tread F/R:72.7mm
■Weight 242g (excl. battery)
■Motor/Engine 130 Class
■Gear Ratio 55.44：1/46.20：1/39.60：1
39.60：1/34.65：1/34.65：1
■Front Tire Diameter Φ37.0mm
■Rear Tire Diameter Φ37.0mm
■Front Tire Width 12mm
■Rear Tire Width 12mm
■Battery 4 x AAA Alkaline
■Transmitter Syncro KT-531P
■Speed：Approx. 2.7km/h〜5.4km/h (Pinion gears 10T〜 20T)
■Running Time Approx. 60 mins
<Kit Content>
●Complete chassis with built-in electronics.
●Factory-painted body complete with many fine details
●KT-531P 2.4GHz transmitter
●Pinion gear set（10T、12T、14T、16T、18T、20T）
●3 types of pinion gear spacers
Option parts for the TURBO OPTIMA.
Soft compound of 50mm tire. For low grip road surface
Back plate for the KE21 SP / KE25SP / KE25SP2 engine. Back plate elimintes the pull start allowing the use of starter boxes. Less friction allows more performance.
Optional parts for INFERNO MP10e. Battery spacer for short LiPo batteries.
It is getting popular to use the shorty LiPo batteries to 1/8 EP Buggy due to the improved performance. The battery can be changed the installing position in the battery holder to adjust a center of gravity and balance as well as making weight reduction. That are advantage to use with the shorty LiPo battery. When use the shorty battery to MP10e, it has same effect for car. It can also be used with vintage Scorpion, Beetle and Fazer series.
Lightweight Carbon Rear Shaft for the FANTOM EP 4WD. Improves throttle response by lighter rotating parts. The screw part at tip of differential side is assembled with aluminum parts by factory. Recommended to use with EFW003.
Tie-rod set for the MA-03F/MA-030. Provides four steps of toe angle setup for each narrow and wide configuration.
<Readyset Contents>
●Fully assembled and painted chassis
●3ch transmitter
<Required for Operation>
●1 x PP3 9V alkaline battery for transmitter
●4 x AAA alkaline batteries for model
Optional parts for the INFERNO MP9/MP10.
Allows to change the inside center differential gear ratio from 10T/20T to 12T/18T.
By changing the differential effect, improve running stability on bumpy track
Increased a setting variety.
Spare parts for Javelin. Compatible with the Optima to use the Javelin roll cage body.
Pit mat with cool MINI-Z logos.
Great for maintanance of your MINI-Z while keeping the pit table clean.
Soft and grippy PVC material avoids small parts to fall off the table.
Size: 24 in. x 17 in. (approx 600 x 430mm).
Light weight 2.5mm carbon fiber shock tower. Compared to the stock aluminum shock tower the carbon fiber shock tower is much lighter and with the same durability
Light weight 2.0mm carbon fiber side plates. 5g lighter without compromising the durability.
Light weight 2.5mm carbon fiber plate. Same durability as the stock plates but 5g lighter.
Optional parts for the TURBO OPTIMA.
Color variation of 50mm wheel.
When use with #OTT244M, it can be used as optional parts for the OPTIMA and JAVELIN.
Turns：15.5Ｔ
Operating Voltage：1-3Ｓ／12.6Ｖ
RPM@7.4V：18870
KV（RPM／V）：2550
Max Current：38A
Max Power：320W
Efficiency：90％
Weight（g）：179
Motor Diameter（mm）：35.8
Motor Length（mm）：51.2
Shaft Length（mm）：15
Shaft Diameter（mm）：3.175
3 types of wire diameters can be chosen for both front and rear. Provides a wide range of setting options
■Length 430mm
■Width 197mm
■Ground Clearance 5mm approx.
■Wheelbase 270mm
■Tread (F/R) 164mm / 166～172mm
■Wheel（F/R） Φ36mm x 30mm / Φ36mm x 45mm
■Weight 1,100g approx.
■Motor Brushless (sold separately)
Required for operation
●2-channel, 1 servo R/C system for cars
●Brushless motor
●ESC for brushless motor
●Battery
●Battery charger for chassis battery
●Tires
●1/10 Formula car body
●Tools
●Paint for body
●Batteries for R/C system
