●Body size: φ110 (including rotor) x H89 (mm)
●"Doraemon" body size: W48.8 x H58 x D39.3 (without rotor) (mm)
●Body weight: 19g
●Transmitter size: W116 x H89 x D36 (mm)
Package size: W185 x H245 x D118 (mm)
Target age: 10 years old and over

● "Flying Doraemon" body
● Transmitter
● Instruction manual
● USB cable
● Spare parts Rotor (1 set)
● Paper display stand

●Scale: Approximately 1/28 scale
●Product size：L181 x H46 x D71（mm）
●Product weight：109g (approx.)
●Package size：W215 × H225 × D115（mm）
●Package weight：433g (approx.)
●Maximum speed: Training mode: 7km/h Racing mode: 10km/h
●Operation distance: approx. 30m
●Frequency: 2.4GHz (12 vehicles can run simultaneously)
●Continuous running time: Approximately 60 minutes (when using new alkaline batteries)
●Target age: 6 years old or older

<Kit Content>
●Main unit
●2.4GHz controller with stopwatch
●Mini pylons (6 pieces)
●Trim adjuster
●Battery holder

<Required to run>
●AAA-size alkaline batteries x 2 for chassis (sold separately)
●AAA-size alkaline batteries x 2 for transmitter (sold separately)

■Length 660mm
■Width 160mm
■Height 325mm
■Weight 1,530g approx.
■Motor 550-class G14L motor with water-cooling jacket
■propeller Size D31 x P1.4 (polycarbonate)
■Maximum Speed 21km/h approx.
■Operation time 5 minutes 30 seconds approx.

＜ Kit Contents ＞
●Pre-colored surf board installed with R/C system, complete with linkages
●Complete pre-painted surfer figure
●KT-231P+2.4GHz 2ch pistol grip type transmitter
●7.2V-22HV NiMH battery
●Ni-MH battery dedicated delta peak USB charger
●Styrofoam slipway
●Spare ladder

＜ Required for Operation ＞
●AA batteries x 4 for transmitter

■Length 595mm
■Width 220mm
■Height 350mm
■Weight 1,600g approx.
■Transmitter KT-231P+
■ESC KYOSHO SPEED HOUSE
          KA060-91W
■Servo KS4031-06W
■Motor 550-class G14L motor with water-cooling jacket
■Battery 7.2V-2200mAh NiMH
■Compatible battery size L148xW52xH30mm or less
■Charger Ni-MH battery dedicated USB charger
■Propeller D31xP1.4 (Polycarbonate)
■Maximum speed 24km/h approx.
■Operation time 5 min approx.

■Length 595mm
■Width 220mm
■Height 350mm
■Weight 1,600g approx.
■Transmitter KT-231P+
■ESC KYOSHO SPEED HOUSE
          KA060-91W
■Servo KS4031-06W
■Motor 550-class G14L motor with water-cooling jacket
■Battery 7.2V-2200mAh NiMH
■Compatible battery size L148xW52xH30mm or less
■Charger Ni-MH battery dedicated USB charger
■Propeller D31xP1.4 (Polycarbonate)
■Maximum speed 24km/h approx.
■Operation time 5 min approx.

●Scale approx. 1/28
●Product size: L164 x D73 x H45 (mm) ● Body
weight: approx . Mode: 7km/h / Racing mode: 10km/h ●Operable distance: approx. 30m ●Frequency: 2.4GHz (12 units can run simultaneously) ●Continuous running time: approx. 60 minutes (when using new alkaline batteries) ●Target age: 6 years old that's all

KIT CONTENTS

■Length　490mm
■Width　307mm
■Height　180mm
■Ground Clearance　28mm
■Wheelbase　325mm (4 settings available by changing rear hub collar position)
■Tread (F/R)　254mm (2 front settings and 3 rear settings available by changing bushes)
■Tire (F/R)　φ116 x 44mm
■Gear Ratio　11.7:1
■Weight　3,370g approx.
■Engine　KE21V (recoil starter installed/rear exhaust)

<kIT cONTENT>
●Factory assembled chassis installed with R/C system
●Printed pre-cut body complete with coloring
●Pre-installed KE21V engine with rear exhaust
●Syncro KT-331P transmitter
●1.5, 2.0, 2.5mm Hexagonal wrench
●Cross wrench (small)
●17mm Wheel wrench

<Require for operation>
●AAA x 8 alkaline batteries for transmitter
●Fuel
●Starting tools (Fuel bottle, Plug heater)

■Length　490mm
■Width　307mm
■Height　180mm
■Ground clearance　28mm
■Wheelbase　325mm 
■Tread（F / R）　254mm
■Tires（F / R）　sold separately
■Gear Ratio　12.19：1
■Weight　3390g(approx.)
■Engine　21Class (sold separately)

＜Kit Contents＞
●Unassembled chassis kit
●Wing
●Special clear body
●Window mask seal
●Logo decals
●Fuel tube
●Linkage parts
●Clutch parts
●Air cleaner
●Ring gear grease
●1.5, 2.0, 2.5mm Hexagonal wrench
●Cross wrench 
●Wheel wrench

＜Required for Operation＞
●2-channel 2-servo R/C system for cars
●Compatible batteries for R/C system
●21 engine
●Wheels & Tires w/foam inserts for 1/8 buggy
●Starter box
●Plug heater
●Muffler & manifold
●Fuel
●Fuel bottle
●Oil for air cleaner
●Shock oil
●Diff oil
●Paint for car body
●Instant adhesive
●Tools
●Screw lock material

●Scale: Approximately 1/28 scale
●Product size：L183 x H76x D82（mm）
●Product weight：144g (approx.)
●Package size：W215 × H225 × D115（mm）
●Package weight：407g (approx.)
●Maximum speed: Training mode: 7km/h Racing mode: 10km/h
●Operation distance: approx. 30m
●Frequency: 2.4GHz (12 vehicles can run simultaneously)
●Continuous running time: Approximately 60 minutes (when using new alkaline batteries)
●Target age: 6 years old or older

<Required to run>
●AAA-size alkaline batteries x 2 for chassis (sold separately)
●AAA-size alkaline batteries x 2 for transmitter (sold separately)

●Scale: Approximately 1/28 scale
●Product size：L160 x H50.5 x D73.9（mm）
●Product weight：109g (approx.)
●Package size：W215 × H225 × D115（mm）
●Package weight：Approximately 343g
●Maximum speed: Training mode: 7km/h Racing mode: 10km/h
●Operation distance: approx. 30m
●Frequency: 2.4GHz (12 vehicles can run simultaneously)
●Continuous running time: Approximately 60 minutes (when using new alkaline batteries)
●Target age: 6 years old or older

<Kit Content>
●Main unit
●2.4GHz controller with stopwatch
●Mini pylons (6 pieces)
●Trim adjuster
●Battery holder
●Seal

<Required to run>
●AA-size alkaline batteries x 2 for chassis (Not included)
●AA-size alkaline batteries x 2 for transmitter (Not included)

■Length 507mm
■Width 307mm
■Height 189mm
■Wheelbase 325.5mm
■Tread (F/R) 258mm／261mm
■Tire (F/R) φ116×44mm／φ116×44mm
■Gear Ratio 11.70：1
■Weight 3,400g (approx.)
■Engine KE21SP
■Transmitter 2.4GHz Syncro KT-231P+

＜Readyset Contents＞
●Factory assembled chassis complete with control linkages
●Finished body complete with printed color scheme
●2.4GHz Syncro KT-231P+ transmitter
●Break in ring
●1.5、2.0、2.5、3.0mm L shaped hex wrenches
●Cross wrench
●17mm wheel wrench

<Required for Operation>
●Glow fuel
●8 x AA size alkaline batteries for transmitter and receiver
●Engine starting tools (fuel bottle, plug heater)
●Tool

■Length 507mm
■Width 307mm
■Height 189mm
■Wheelbase 325.5mm
■Tread (F/R) 258mm／261mm
■Tire (F/R) φ116×44mm／φ116×44mm
■Gear Ratio 11.70：1
■Weight 3,400g (approx.)
■Engine KE21SP
■Transmitter 2.4GHz Syncro KT-231P+

＜Readyset Contents＞
●Factory assembled chassis complete with control linkages
●Finished body complete with printed color scheme
●2.4GHz Syncro KT-231P+ transmitter
●Break in ring
●1.5、2.0、2.5、3.0mm L shaped hex wrenches
●Cross wrench
●17mm wheel wrench

<Required for Operation>
●Glow fuel
●8 x AA size alkaline batteries for transmitter and receiver
●Engine starting tools (fuel bottle, plug heater)
●Tool

■Scale: Approximately 1/28 scale
■Total length: 130mm
■Total width: 70mm
■Total height: 35mm
■Weight: Approximately 110g (excluding AA alkaline batteries)
■Maximum speed: Training mode: 7km/h Racing mode: 10km/h
■Operating distance: Approximately 30m
■Frequency: 2.4GHz (12 units can run simultaneously)
■Continuous running time: Approximately 60 minutes (when using new alkaline batteries)
■Recommended age: 6 years old and above

<Set contents>
● First Minute main unit
● 2.4GHz controller with stopwatch
● Mini pylon (6 pieces)
● Sticker
● Trim adjuster
● Battery holder

<Required to run>
Main unit: 2 AA alkaline batteries
Transmitter: 2 AA alkaline batteries

■Scale: Approximately 1/28 scale
■Total length: 130mm
■Total width: 70mm
■Total height: 35mm
■Weight: Approximately 110g (excluding AA alkaline batteries)
■Maximum speed: Training mode: 7km/h Racing mode: 10km/h
■Operating distance: Approximately 30m
■Frequency: 2.4GHz (12 units can run simultaneously)
■Continuous running time: Approximately 60 minutes (when using new alkaline batteries)
■Recommended age: 6 years old and above

<Set contents>
● First Minute main unit
● 2.4GHz controller with stopwatch
● Mini pylon (6 pieces)
● Sticker
● Trim adjuster
● Battery holder

<Required to run>
Main unit: 2 AA alkaline batteries
Transmitter: 2 AA alkaline batteries

■Scale: Approximately 1/28 scale
■Total length: 130mm
■Total width: 70mm
■Total height: 35mm
■Weight: Approximately 110g (excluding AA alkaline batteries)
■Maximum speed: Training mode: 7km/h Racing mode: 10km/h
■Operating distance: Approximately 30m
■Frequency: 2.4GHz (12 units can run simultaneously)
■Continuous running time: Approximately 60 minutes (when using new alkaline batteries)
■Recommended age: 6 years old and above

<Set contents>
● First Minute main unit
● 2.4GHz controller with stopwatch
● Mini pylon (6 pieces)
● Sticker
● Trim adjuster
● Battery holder

<Required to run>
Main unit: 2 AA alkaline batteries
Transmitter: 2 AA alkaline batteries

■Length 660mm
■Width 310mm
■Height 180mm
■Wheelbase 360mm
■Tread (F/R) 262mm／265mm
■Tire (F/R)  Φ97mm ×40mm
■Gear Ratio 1st gear /10.14:1　2nd gear /7.49:1
■Weight 3,660g（approx. ）
■Engine　KE25SP2
■Transmitter　Syncro KT-331P

<Kit Content>
●Pre-assembled chassis installed with 2-ch, 2-servo R/C system and pre-set control linkages
●Pre-painted factory assembled body with decals applied
●Installed KE25SP2 rear exhaust engine
●Installed polished tuned muffler
●Syncro KT-331P transmitter
●Hex wrenches: 1.5, 2.0, 2.5, 3.0mm
●Cross wrench (large)
●17mm wheel wrench
●Nylon strap (for air cleaner)
●Break in ring
●Bind code

<Require to run>
●8 x AA batteries for transmitter (4) and receiver (4)
●Fuel
●Engine starting tools (fuel bottle, plug heater)

■Length 469mm
■Width 307mm
■Height 189mm
■Wheelbase 325.5mm
■Tread (F/R) 258mm／261mm
■Tire (F/R) φ116×44mm／φ116×44mm
■Gear Ratio 11.56：1
■Weight 3,400g (approx.)
■Engine KE21SP
■Transmitter 2.4GHz Syncro KT-231P+

■Length 469mm
■Width 307mm
■Height 189mm
■Wheelbase 325.5mm
■Tread (F/R) 258mm／261mm
■Tire (F/R) φ116×44mm／φ116×44mm
■Gear Ratio 11.56：1
■Weight 3,400g (approx.)
■Engine KE21SP
■Transmitter 2.4GHz Syncro KT-231P+

<Readyset Contents>
●Factory assembled chassis complete with control linkages
●Finished body complete with printed color scheme
●2.4GHz Syncro KT-231P+ transmitter
●1.5、2.0、2.5、3.0mm L shaped hex wrenches
●Cross wrench
●17mm wheel wrench

■Length　490mm
■Width　307mm
■Height　180mm
■Ground Clearance　28mm
■Wheelbase　325mm (4 settings available by changing rear hub collar position)
■Tread (F/R)　254mm (2 front settings and 3 rear settings available by changing bushes)
■Tire (F/R)　φ116 x 44mm
■Gear Ratio　11.7:1
■Weight　3,370g approx.
■Engine　KE21SP (recoil starter installed/rear exhaust)

<Kit Content>
●Factory assembled chassis installed with R/C system
●Printed pre-cut body complete with coloring
●Pre-installed KE21SP engine with rear exhaust
●Syncro KT-331P transmitter
●1.5, 2.0, 2.5mm Hexagonal wrench
●Cross wrench (small)
●17mm Wheel wrench

<Require to run>
●AAA x 8 alkaline batteries for transmitter
●Fuel
●Starting tools (Fuel bottle, Plug heater)

■Length　490mm
■Width 　307mm
■Height 　180mm
■Ground clearance　28mm
■Wheelbase　325mm 
■Tread（Ｆ／Ｒ）　254mm
■Tires（Ｆ／Ｒ）　sold separately
■Gear Ratio　11.7：1
■Weight　3,360g(approx.)
■Engine　21Class (sold separately)

＜Kit Contents＞
●Unassembled chassis kit
●Special wheels
●Wing
●Special clear body
●Window mask seal
●Logo decals
●Fuel tube
●Linkage parts
●Clutch parts
●Air cleaner
●Ring gear grease
●1.5, 2.0, 2.5mm Hexagonal wrench
●Cross wrench 
●Wheel wrench

＜Required for Operation＞
●2-channel 2-servo R/C system for cars
●Compatible batteries for R/C system
●21 engine
●Muffler
●Tires w/foam inserts for 1/8 buggy
●Starter box
●Plug heater
●Fuel
●Fuel bottle
●Oil for air cleaner
●Shock oil
●Diff oil
●Paint for car body
●Tools

■Length　375mm
■Width　200mm
■Wheelbase　258mm
■Tread (F/R)　176mm
■Tire(F/R)　φ66×25mm
■Gear Ratio　7.47 / 5.44：1
■Weight　1,800g (approx.)
■Engine KE15SP with recoil starter
■Max Speed 64Km(approx.)

<Kit Contents>
●chassis kit
●FAT701M TC Tire (M)＆Inner sponge、VZH003BK  Wheel（not glued）
●Pre-mounted KE15SP engine with recoil starter
●Setting change parts
●1.5mm/2.0mm/2.5mm/5.0mm Hex wrench
●Cross wrench
●3/4/5/5.5/7/8mm Spanner

<Required to run>
●2ch R/C car transmitter
●Body
●Servos x 2
●4 x AA sized alkaline batteries for receiver and Battery Holder or Battery
●4 x AA sized alkaline batteries for transmitter
●Switch
●Silicon oil for Shock
●Silicon oil for diff
●Grease
●GP Starting Tool Set
●Fuel Bottle
●Glow Fuel
●Tool

<Required for Operation>

EP Version
●4 channel, 4 servo R/C system for airplanes (standard servo x 4)
●Batteries for transmitter
●100mm Y extension cord x 1 for aileron servo
●200mm extension cord x 2 for aileron servo
●Propeller
●Out Runner BL motor for 40-50 class
●ESC
●Li-Po battery
●Charger for Li-Po battery

GP Version
●4 channel, 5 servo R/C system for airplanes (standard servo x 5)
●Batteries for transmitter
●100mm Y extension cord x 1 for aileron servo
●200mm extension cord x 2 for aileron servo
●Propeller
●2 cycle 40-46 engine for airplanes
●Starting tools (plug heater, starter, starter battery, charger)
●Glow fuel for airplanes

■Length: 998mm
■Width: 226mm
■Height: 1,850mm
■Weight: 3,100g
■R/C System: Syncro KT-431S, 2.4GHz, FHSS
■Sail Area: 39dm2
■Servo: Sail KS9071-20SW（waterproof）/　Rudder KS4031-06W

＜Readyset Contents＞
●Pre-colored fully assembled hull
●Syncro KT-431S 2.4GHz R/C system installed
●Folding wood boat stand
●Mast Assy
●Decal for Sail
●Painted Rudder, Keel & Ballast

＜Required for operation ＞
●8 x AA sized batteies for transmitter/receiver (4 for transmitter, 4 for receiver)

■Length: 612mm
■Width: 130mm
■Height: 1,135mm
■Weight: 1,050g
■Sail Area: 21.85dm2

■Length 570mm
■Width 450mm
■Height 281mm
■Weight 4,990g
■Wheelbase 360mm
■Tread F:339mm R:343mm
■Tires （F & R） φ164×104mm
■Gear Ratio 25.7/19.8/15.6:1
■Engine KE25SP2 with recoil starter

<Readyset Contents>
●Pre-assembled chassis with pre-set control linkages
●Pre-cut and painted body complete with decals applied
●2.4GHz Syncro KT-231P+ transmitter
●L shaped hex wrench (1.5mm, 2.0mm, 2.5mm, 3.0mm)
●Cross wrench (large)
●17mm wheel wrench

<Required for Operation>
●AA-size batteries x 4 for transmitter
●AA-size batteries x 4 for receiver
●Glow fuel for models
●Fuel bottle
●Plug heater

■Length　1300mm
■Width　1600mm
■Weight　EP/2,550g (approx.), GP/2,450g (approx.)
■Motor　600-1000W BL Motor (sold separately)
■Engine　2 Cycle 40-46 class engine (sold separately)
■Battery (EP)　14.8V-4,000-5,000mAh Li-Po battery (sold separately)
■Main Wing Area　 44dm2
■Wing Loading　55.7-55.9g/dm2
■Airfoil 　Original semi-symmetrical
■Propeller size　D11 x P7-D12 x P8 (sold separately)
■Tire size　Nose 60mm / Main 60mm
■Dihedral　2.5°
■Side Thrust　2°
■R/C system (EP)　4ch, 4 servo, 1 ESC (sold separately)
■R/C system (GP)　4ch, 5 servo (sold separately)

■Length: 1,600mm
■Width: 1,800mm
■Weight : (EP) 3,900g　(GP) 3,700g
■Motor(EP): 800-1200W class backplate mounted outrunner brushless (sold separately)
■Engine (GP): 2-cycle 60-65 class (sold separately)
■Battery (EP): 14.8V 5,000ｍAh Li-Po (sold separately)
■Wing Area: 60.6dm2
■Wing Load : 61.0-64.3g/dm2
■Wing Type : Original semi-symmetrical
■Propeller : D12xP6-D14xP8 (sold separately)

■Length: 1,600mm
■Width: 1,800mm
■Weight : (EP) 3,900g　(GP) 3,700g
■Motor(EP): 800-1200W class backplate mounted outrunner brushless (sold separately)
■Engine (GP): 2-cycle 60-65 class (sold separately)
■Battery (EP): 14.8V 5,000ｍAh Li-Po (sold separately)
■Wing Area: 60.6dm2
■Wing Load : 61.0-64.3g/dm2
■Wing Type : Original semi-symmetrical
■Propeller : D12xP6-D14xP8 (sold separately)

■Length　490mm
■Width　307mm
■Height　180mm
■Ground Clearance　28mm
■Wheelbase　325mm (4 settings available by changing rear hub collar position)
■Tread (F/R)　254mm (2 front settings and 3 rear settings available by changing bushes)
■Tire (F/R)　φ116 x 44mm
■Gear Ratio　11.7:1
■Weight　3,370g approx.
■Engine　KE21SP (recoil starter installed/rear exhaust)

■Length 469mm
■Width 307mm
■Height 189mm
■Wheelbase 325.5mm
■Tread (F/R) 258mm／261mm
■Tire (F/R) φ116×44mm／φ116×44mm
■Gear Ratio 11.56：1
■Weight 3,400g (approx.)
■Engine KE21SP
■Transmitter 2.4GHz Syncro KT-231P+

■Length 1300mm
■Width 1600mm
■Weight EP/2,550g (approx.), GP/2,450g (approx.)
■Motor 600-1000W BL Motor (sold separately)
■Engine 2 Cycle 40-46 class engine (sold separately)
■Battery (EP) 14.8V-4,000-5,000mAh Li-Po battery (sold separately)
■Main Wing Area 44dm2
■Wing Loading 55.7-55.9g/dm2
■Airfoil Original semi-symmetrical
■Propeller size D11 x P7-D12 x P8 (sold separately)
■Tire size Nose 60mm / Main 60mm
■Dihedral 2.5°
■Side Thrust 2°
■R/C system (EP) 4ch, 4 servo, 1 ESC (sold separately)
■R/C system (GP) 4ch, 5 servo (sold separately)

■Length 1400mm
■Width 1600mm
■Weight EP/2,550g (approx.), GP/2,450g (approx.)
■Motor 600-1000W BL Motor (sold separately)
■Engine 2 Cycle 40-46 class engine (sold separately)
■Battery (EP) 14.8V-4,000-5,000mAh Li-Po battery (sold separately)
■Main Wing Area 44dm2
■Wing Loading 55.7-55.9g/dm2
■Airfoil Original semi-symmetrical
■Propeller size D11 x P7-D12 x P8 (sold separately)
■Tire size Nose 60mm / Main 60mm
■Dihedral 2.5°
■Side Thrust 2°
■R/C system (EP) 4ch, 4 servo, 1 ESC (sold separately)
■R/C system (GP) 4ch, 5 servo (sold separately)

■Length 1400mm
■Width 1600mm
■Weight EP/2,550g (approx.), GP/2,450g (approx.)
■Motor 600-1000W BL Motor (sold separately)
■Engine 2 Cycle 40-46 class engine (sold separately)
■Battery (EP) 14.8V-4,000-5,000mAh Li-Po battery (sold separately)
■Main Wing Area 44dm2
■Wing Loading 55.7-55.9g/dm2
■Airfoil Original semi-symmetrical
■Propeller size D11 x P7-D12 x P8 (sold separately)
■Tire size Nose 60mm / Main 60mm
■Dihedral 2.5°
■Side Thrust 2°
■R/C system (EP) 4ch, 4 servo, 1 ESC (sold separately)
■R/C system (GP) 4ch, 5 servo (sold separately)

■Length 660mm ■Width 160mm ■Height 325mm ■Weight 1,500g approx. ■Motor 540-class G24 motor with water-cooling jacket ■Screw D31 x P1.4 (polycarbonate) ■Charging Time 8 hours approx. 16km/h approx. ■Operation time 7 min approx

■Length 660mm ■Width 160mm ■Height 325mm ■Weight 1,500g approx. ■Motor 540-class G24 motor with water-cooling jacket ■Screw D31 x P1.4 (polycarbonate) ■Charging Time 8 hours approx. 16km/h approx. ■Operation time 7 min approx.

■Length: 945mm
■Width: 230mm
■Weight: 2,350g
■Motor: KYOSHO SPEED HOUSE TORX M6 water-cooled brushless motor (40x68mm, KV1250)
■Battery: 2 x 3 cell 11.1V-3600-4000mAh LiPo battery (Super Plug specification, sold separately)
■R/C System: Perfex KT-231P+
■Propeller: D40×P1.4（3-blade）
■ESC : KYOSHO SPEED HOUSE KA120-91WC 120A water-cooled, waterproof brushless ESC

■Length: 900mm
■Width: 187mm
■Height: 140mm
■Weight: 1,780g (when 14.8V-4000mAh installed)
■Motor: Pre-installed KYOSHO SPEED HOUSE TORX M4 Brushless water-cooled motor (40x68mm, KV2000)
■Battery: 4 cell 14.8V 3600-4000mAh LiPO (Super Plug specification, sold separately)
■Propeller: Carbon reinforced nylon D40 x P1.4 (3-blade)
■ESC: Pre-installed KYOSHO SPEED HOUSE 120A KA120-91WC water-cooled, waterproof brushless ESC
■Servo: KS-4031-06W

■Length  575mm
■Width  428mm
■Wheelbase 381-386mm
■Tread（F/R） 353mm／353mm
■Tires（F/R） For stadium track(not included)
■Gear Ratio 16.3:1
■Weight  3,870g approx.
■Engine .21 ～ .28 classes(not included)
■Transmitter 2ch or more 2 servo(not included)

■Length　1300mm
■Width　1600mm
■Weight　EP/2,550g (approx.), GP/2,450g (approx.)
■Motor　600-1000W BL Motor (sold separately)
■Engine　2 Cycle 40-46 class engine (sold separately)
■Battery (EP)　14.8V-4,000-5,000mAh Li-Po battery (sold separately)
■Main Wing Area　 44dm2
■Wing Loading　55.7-55.9g/dm2
■Airfoil 　Original semi-symmetrical
■Propeller size　D11 x P7-D12 x P8 (sold separately)
■Tire size　Nose 60mm / Main 60mm
■Dihedral　2.5°
■Side Thrust　2°
■R/C system (EP)　4ch, 4 servo, 1 ESC (sold separately)
■R/C system (GP)　4ch, 5 servo (sold separately)

■Length 1400mm
■Width 1600mm
■Weight EP/2,550g (approx.), GP/2,450g (approx.)
■Motor 600-1000W BL Motor (sold separately)
■Engine 2 Cycle 40-46 class engine (sold separately)
■Battery (EP) 14.8V-4,000-5,000mAh Li-Po battery (sold separately)
■Main Wing Area 44dm2
■Wing Loading 55.7-55.9g/dm2
■Airfoil Original semi-symmetrical
■Propeller size D11 x P7-D12 x P8 (sold separately)
■Tire size Nose 60mm / Main 60mm
■Dihedral 2.5°
■Side Thrust 2°
■R/C system (EP) 4ch, 4 servo, 1 ESC (sold separately)
■R/C system (GP) 4ch, 5 servo (sold separately)

■Length　690mm (hull length 600mm)
■Width　178g
■Height　240mm
■Weight　1,300g approx.
■Motor　Water-cooled G20 
■Speed controller　Waterproof KA060-91W    
■Transmitter　Syncro KT-231P+
■Propeller　D42 x P1.4
■Servo　Waterproof KS4031-06W

■Length 690mm (Hull 600mm)
■Width 178mm
■Height 145mm
■Weight 1,150g approx.
■Motor Water-cooled G20
■Speed Controller Waterproof KA060-91W
■R/C System Syncro Syncro KT-231P+
■Propeller D42×P1.4
■Servo Waterproof KS4031-06W

■Length: 998mm
■Width: 226mm
■Height: 1,850mm
■Weight: 3,100g
■R/C System: Syncro KT-431S, 2.4GHz, FHSS
■Sail Area: 39dm2
■Servo: Sail KS9071-20SW（waterproof）/　Rudder KS202W (waterproof)

■Length　537mm
■Width　310mm
■Height　116mm（without engine、body post）
■Wheelbase　359mm
■Tread （F/R）　262mm／266mm
■Tires（F/R）　Sold separately （rubber tires for 1/8）
■Gear Ratio　1st speed 10.87: 1 ／ 2nd speed 7.90：1
■Weight　3,270g approx.
■Engine　21 class rear exhaust engine

■Length: 665mm 
■Width: 430mm 
■Height: 230mm 
■Wheelbase: 435mm 
■Tread(F/R): 365 / 365mm 
■Tire(F/R): Φ140×55mm / Φ140×55mm 
■Gear Ratio: 15：1 
■Weight: 5,400g approx. (with body) 
■Engine: KYOSHO XXL32R 
■RC System: 2.4GHz Syncro KT-201