■Length　490mm
■Width　307mm
■Height　180mm
■Ground Clearance　28mm
■Wheelbase　325mm (4 settings available by changing rear hub collar position)
■Tread (F/R)　254mm (2 front settings and 3 rear settings available by changing bushes)
■Tire (F/R)　φ116 x 44mm
■Gear Ratio　11.7:1
■Weight　3,370g approx.
■Engine　KE21V (recoil starter installed/rear exhaust)

<kIT cONTENT>
●Factory assembled chassis installed with R/C system
●Printed pre-cut body complete with coloring
●Pre-installed KE21V engine with rear exhaust
●Syncro KT-331P transmitter
●1.5, 2.0, 2.5mm Hexagonal wrench
●Cross wrench (small)
●17mm Wheel wrench

<Require for operation>
●AAA x 8 alkaline batteries for transmitter
●Fuel
●Starting tools (Fuel bottle, Plug heater)

■Length  167mm
■Width  106mm
■Height  56mm
■Wheelbase 115mm
■Tread (F/R) 89mm/89mm
■Tire(F/R) F37 x 13.5mm/F37 x 18.5mm
■Weight  200g (approx.)
■Motor  130 class
■Battery AAA alkaline x 4
■R/C System KT-531P FHSS 2.4 GHz

＜Readyset Contents＞
●Factory assembled chassis with pre-installed R/C unit
●KT-531P transmitter
●Pre-painted polycarbonate body finished with markings
●Pinion gears (11T, 13T, 15T)
●Spur gears (33T, 35T)
●Pinion gear tool
●Pairing stick
●Wheel wrench
●Spare nuts for wheels

＜Required for operation＞
●AAA alkaline batteries x 4 or NiMH batteries x 4 for chassis
●AAA alkaline batteries x 4 for KT-531P transmitter

※It is not possible to drive with auto scale alone. In addition, some bodies cannot be mounted depending on the chassis.
※The separately sold LED light unit set (No.MZW429R) cannot be installed on the McLaren 720S GT3.

※It is not possible to drive with auto scale alone. In addition, some bodies cannot be mounted depending on the chassis.
※The separately sold LED light unit set (No.MZW429R) cannot be installed on the McLaren 720S GT3.

■Length　490mm
■Width　307mm
■Height　180mm
■Ground clearance　28mm
■Wheelbase　325mm 
■Tread（F / R）　254mm
■Tires（F / R）　sold separately
■Gear Ratio　12.19：1
■Weight　3390g(approx.)
■Engine　21Class (sold separately)

＜Kit Contents＞
●Unassembled chassis kit
●Wing
●Special clear body
●Window mask seal
●Logo decals
●Fuel tube
●Linkage parts
●Clutch parts
●Air cleaner
●Ring gear grease
●1.5, 2.0, 2.5mm Hexagonal wrench
●Cross wrench 
●Wheel wrench

＜Required for Operation＞
●2-channel 2-servo R/C system for cars
●Compatible batteries for R/C system
●21 engine
●Wheels & Tires w/foam inserts for 1/8 buggy
●Starter box
●Plug heater
●Muffler & manifold
●Fuel
●Fuel bottle
●Oil for air cleaner
●Shock oil
●Diff oil
●Paint for car body
●Instant adhesive
●Tools
●Screw lock material

■Length 507mm
■Width 307mm
■Height 189mm
■Wheelbase 325.5mm
■Tread (F/R) 258mm／261mm
■Tire (F/R) φ116×44mm／φ116×44mm
■Gear Ratio 11.70：1
■Weight 3,400g (approx.)
■Engine KE21SP
■Transmitter 2.4GHz Syncro KT-231P+

＜Readyset Contents＞
●Factory assembled chassis complete with control linkages
●Finished body complete with printed color scheme
●2.4GHz Syncro KT-231P+ transmitter
●Break in ring
●1.5、2.0、2.5、3.0mm L shaped hex wrenches
●Cross wrench
●17mm wheel wrench

<Required for Operation>
●Glow fuel
●8 x AA size alkaline batteries for transmitter and receiver
●Engine starting tools (fuel bottle, plug heater)
●Tool

■Length 507mm
■Width 307mm
■Height 189mm
■Wheelbase 325.5mm
■Tread (F/R) 258mm／261mm
■Tire (F/R) φ116×44mm／φ116×44mm
■Gear Ratio 11.70：1
■Weight 3,400g (approx.)
■Engine KE21SP
■Transmitter 2.4GHz Syncro KT-231P+

＜Readyset Contents＞
●Factory assembled chassis complete with control linkages
●Finished body complete with printed color scheme
●2.4GHz Syncro KT-231P+ transmitter
●Break in ring
●1.5、2.0、2.5、3.0mm L shaped hex wrenches
●Cross wrench
●17mm wheel wrench

<Required for Operation>
●Glow fuel
●8 x AA size alkaline batteries for transmitter and receiver
●Engine starting tools (fuel bottle, plug heater)
●Tool

*Autoscale alone cannot run. Also, some bodies cannot be mounted on certain chassis.
*The separately sold LED light unit set (No. MZW429R) can be installed on the HKS Skyline (R32 GT-R) 1993 #87.

■Length 660mm
■Width 310mm
■Height 180mm
■Wheelbase 360mm
■Tread (F/R) 262mm／265mm
■Tire (F/R)  Φ97mm ×40mm
■Gear Ratio 1st gear /10.14:1　2nd gear /7.49:1
■Weight 3,660g（approx. ）
■Engine　KE25SP2
■Transmitter　Syncro KT-331P

<Kit Content>
●Pre-assembled chassis installed with 2-ch, 2-servo R/C system and pre-set control linkages
●Pre-painted factory assembled body with decals applied
●Installed KE25SP2 rear exhaust engine
●Installed polished tuned muffler
●Syncro KT-331P transmitter
●Hex wrenches: 1.5, 2.0, 2.5, 3.0mm
●Cross wrench (large)
●17mm wheel wrench
●Nylon strap (for air cleaner)
●Break in ring
●Bind code

<Require to run>
●8 x AA batteries for transmitter (4) and receiver (4)
●Fuel
●Engine starting tools (fuel bottle, plug heater)

※It is not possible to drive with auto scale alone. In addition, some bodies cannot be mounted depending on the chassis.

※It is not possible to drive with auto scale alone. In addition, some bodies cannot be mounted depending on the chassis.
※The separately sold LED light unit set (No.MZW429R) cannot be installed on the ASC MR-03W-LM Sauber-Mercedes Gruppe-C-Rennsportwagen C9, Nr.63, LM 1989.

■Length 469mm
■Width 307mm
■Height 189mm
■Wheelbase 325.5mm
■Tread (F/R) 258mm／261mm
■Tire (F/R) φ116×44mm／φ116×44mm
■Gear Ratio 11.56：1
■Weight 3,400g (approx.)
■Engine KE21SP
■Transmitter 2.4GHz Syncro KT-231P+

■Length 469mm
■Width 307mm
■Height 189mm
■Wheelbase 325.5mm
■Tread (F/R) 258mm／261mm
■Tire (F/R) φ116×44mm／φ116×44mm
■Gear Ratio 11.56：1
■Weight 3,400g (approx.)
■Engine KE21SP
■Transmitter 2.4GHz Syncro KT-231P+

<Readyset Contents>
●Factory assembled chassis complete with control linkages
●Finished body complete with printed color scheme
●2.4GHz Syncro KT-231P+ transmitter
●1.5、2.0、2.5、3.0mm L shaped hex wrenches
●Cross wrench
●17mm wheel wrench

■Length　490mm
■Width　307mm
■Height　180mm
■Ground Clearance　28mm
■Wheelbase　325mm (4 settings available by changing rear hub collar position)
■Tread (F/R)　254mm (2 front settings and 3 rear settings available by changing bushes)
■Tire (F/R)　φ116 x 44mm
■Gear Ratio　11.7:1
■Weight　3,370g approx.
■Engine　KE21SP (recoil starter installed/rear exhaust)

<Kit Content>
●Factory assembled chassis installed with R/C system
●Printed pre-cut body complete with coloring
●Pre-installed KE21SP engine with rear exhaust
●Syncro KT-331P transmitter
●1.5, 2.0, 2.5mm Hexagonal wrench
●Cross wrench (small)
●17mm Wheel wrench

<Require to run>
●AAA x 8 alkaline batteries for transmitter
●Fuel
●Starting tools (Fuel bottle, Plug heater)

* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.

■Length　490mm
■Width 　307mm
■Height 　180mm
■Ground clearance　28mm
■Wheelbase　325mm 
■Tread（Ｆ／Ｒ）　254mm
■Tires（Ｆ／Ｒ）　sold separately
■Gear Ratio　11.7：1
■Weight　3,360g(approx.)
■Engine　21Class (sold separately)

＜Kit Contents＞
●Unassembled chassis kit
●Special wheels
●Wing
●Special clear body
●Window mask seal
●Logo decals
●Fuel tube
●Linkage parts
●Clutch parts
●Air cleaner
●Ring gear grease
●1.5, 2.0, 2.5mm Hexagonal wrench
●Cross wrench 
●Wheel wrench

＜Required for Operation＞
●2-channel 2-servo R/C system for cars
●Compatible batteries for R/C system
●21 engine
●Muffler
●Tires w/foam inserts for 1/8 buggy
●Starter box
●Plug heater
●Fuel
●Fuel bottle
●Oil for air cleaner
●Shock oil
●Diff oil
●Paint for car body
●Tools

■Length　375mm
■Width　200mm
■Wheelbase　258mm
■Tread (F/R)　176mm
■Tire(F/R)　φ66×25mm
■Gear Ratio　7.47 / 5.44：1
■Weight　1,800g (approx.)
■Engine KE15SP with recoil starter
■Max Speed 64Km(approx.)

<Kit Contents>
●chassis kit
●FAT701M TC Tire (M)＆Inner sponge、VZH003BK  Wheel（not glued）
●Pre-mounted KE15SP engine with recoil starter
●Setting change parts
●1.5mm/2.0mm/2.5mm/5.0mm Hex wrench
●Cross wrench
●3/4/5/5.5/7/8mm Spanner

<Required to run>
●2ch R/C car transmitter
●Body
●Servos x 2
●4 x AA sized alkaline batteries for receiver and Battery Holder or Battery
●4 x AA sized alkaline batteries for transmitter
●Switch
●Silicon oil for Shock
●Silicon oil for diff
●Grease
●GP Starting Tool Set
●Fuel Bottle
●Glow Fuel
●Tool

※It is not possible to drive with auto scale alone. In addition, some bodies cannot be mounted depending on the chassis.
※The separately sold LED light unit set (No.MZW429R) cannot be installed on the MITSUBISHI LANCER EVOLUTION X MITSUBISHI MOTORS DEALER TEAM PWRC2008.

※It is not possible to drive with auto scale alone. In addition, some bodies cannot be mounted depending on the chassis.
※The separately sold LED light unit set (No.MZW429R) cannot be installed on the IMPREZA 22B-STi.

* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.

Exquisite finish and realistic appearance. A complete body series that can be enjoyed as a high-quality display that provides the joy of decorating.
* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.

Exquisite finish and realistic appearance. A complete body series that can be enjoyed as a high-quality display that provides the joy of decorating.
* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.

Exquisite finish and realistic appearance. A complete body series that can be enjoyed as a high-quality display that provides the joy of decorating.
* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.

* You cannot drive with the auto scale alone. In addition, some bodies cannot be mounted due to the chassis.

■Length 570mm
■Width 450mm
■Height 281mm
■Weight 4,990g
■Wheelbase 360mm
■Tread F:339mm R:343mm
■Tires （F & R） φ164×104mm
■Gear Ratio 25.7/19.8/15.6:1
■Engine KE25SP2 with recoil starter

<Readyset Contents>
●Pre-assembled chassis with pre-set control linkages
●Pre-cut and painted body complete with decals applied
●2.4GHz Syncro KT-231P+ transmitter
●L shaped hex wrench (1.5mm, 2.0mm, 2.5mm, 3.0mm)
●Cross wrench (large)
●17mm wheel wrench

<Required for Operation>
●AA-size batteries x 4 for transmitter
●AA-size batteries x 4 for receiver
●Glow fuel for models
●Fuel bottle
●Plug heater

Exquisite finish and realistic appearance. A complete body series that can be enjoyed as a high-quality display that provides the joy of decorating.
* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.

This is body shell alone.

Exquisite finish and realistic appearance. A complete body series that can be enjoyed as a high-quality display that provides the joy of decorating.
* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.

Exquisite finish and realistic appearance. A complete body series that can be enjoyed as a high-quality display that provides the joy of decorating.
* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.

Exquisite finish and realistic appearance. A complete body series that can be enjoyed as a high-quality display that provides the joy of decorating.
* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.

＜Chassis＞
■MINI-Z MR-03W-MM 
＜Technical Data＞
■Wheel Base：L（98mm）
■Wheel Off Set：F:N+-0.0 R:W+-0.0
■Wheel Width：8.5mm / R：11mm
■White Body No.：MZN181
■F.Body Mount No.：MZN181

■Length　490mm
■Width　307mm
■Height　180mm
■Ground Clearance　28mm
■Wheelbase　325mm (4 settings available by changing rear hub collar position)
■Tread (F/R)　254mm (2 front settings and 3 rear settings available by changing bushes)
■Tire (F/R)　φ116 x 44mm
■Gear Ratio　11.7:1
■Weight　3,370g approx.
■Engine　KE21SP (recoil starter installed/rear exhaust)

■Length 469mm
■Width 307mm
■Height 189mm
■Wheelbase 325.5mm
■Tread (F/R) 258mm／261mm
■Tire (F/R) φ116×44mm／φ116×44mm
■Gear Ratio 11.56：1
■Weight 3,400g (approx.)
■Engine KE21SP
■Transmitter 2.4GHz Syncro KT-231P+

＜Chassis＞
■MINI-Z MA-020-N
＜Technical Data＞
■Wheel Base：M（90mm）
■Wheel Off Set：F:N+2.5 R:W+-0.0 
■Wheel Width：F：8.5mm（Drift） / R：11.0mm（Drift）

＜Chassis＞
■MINI-Z MR-03W-MM
＜Technical Data＞
■Wheel Base：LL（98mm）
■Wheel Off Set：F:N+1.5 R:W+1.5 
■Wheel Width：F：8.5mm（N） / R：11mm（W）

＜Chassis＞
■MINI-Z MR-03W-MM
＜Technical Data＞
■Wheel Base：LL（98mm）
■Wheel Off Set：F:N+1.5 R:W+1.5 
■Wheel Width：F：8.5mm（N） / R：11mm（W）

＜Chassis＞
■MINI-Z MR-03W-MM
＜Technical Data＞
■Wheel Base：LL（98mm）
■Wheel Off Set：F:N+1.5 R:W+1.5 
■Wheel Width：F：8.5mm（N） / R：11mm（W）

Body shell for Mini-Z

Body shell for Mini-Z

■Length  575mm
■Width  428mm
■Wheelbase 381-386mm
■Tread（F/R） 353mm／353mm
■Tires（F/R） For stadium track(not included)
■Gear Ratio 16.3:1
■Weight  3,870g approx.
■Engine .21 ～ .28 classes(not included)
■Transmitter 2ch or more 2 servo(not included)

＜Chassis＞
■MINI-Z MR-03W-MM 
＜Technical Data＞
■Wheel Base：L（98mm）
■Wheel Off Set：F:N+2.5 R:W+3.0
■Wheel Width：8.5mm / R：11mm
■White Body No.：MZN195

■Length　537mm
■Width　310mm
■Height　116mm（without engine、body post）
■Wheelbase　359mm
■Tread （F/R）　262mm／266mm
■Tires（F/R）　Sold separately （rubber tires for 1/8）
■Gear Ratio　1st speed 10.87: 1 ／ 2nd speed 7.90：1
■Weight　3,270g approx.
■Engine　21 class rear exhaust engine

■Length: 665mm 
■Width: 430mm 
■Height: 230mm 
■Wheelbase: 435mm 
■Tread(F/R): 365 / 365mm 
■Tire(F/R): Φ140×55mm / Φ140×55mm 
■Gear Ratio: 15：1 
■Weight: 5,400g approx. (with body) 
■Engine: KYOSHO XXL32R 
■RC System: 2.4GHz Syncro KT-201