※It is not possible to drive with auto scale alone. In addition, some bodies cannot be mounted depending on the chassis.
※The separately sold LED light unit set (No.MZW429R) cannot be installed on the McLaren 720S GT3.

※It is not possible to drive with auto scale alone. In addition, some bodies cannot be mounted depending on the chassis.
※The separately sold LED light unit set (No.MZW429R) cannot be installed on the McLaren 720S GT3.

For the MR-04 EVO2 chassis. Friction shock for the MR-04MM, featuring carbon plates. It contributes to improved vehicle stability at high speeds. The set includes three springs of varying stiffness levels. The friction shock is compatible with the standard pitching shock and the MZW432B rear oil shock. It can also be used with the MZW708 aluminum oil shock mount.

Optional parts for the 1/8 Inferno MP10 Buggy series. The standard knuckle has a kingpin angle of 0°, while this set features knuckles with 7°kingpin angle. This design reduces front tire catching, particularly in high-speed corners, allowing for higher cornering speeds. It also improves stability, enabling the vehicle to better absorb sudden movements caused by surface gaps or irregularities.

*Autoscale alone cannot run. Also, some bodies cannot be mounted on certain chassis.
*The separately sold LED light unit set (No. MZW429R) can be installed on the HKS Skyline (R32 GT-R) 1993 #87.

0.5mm-thick FRP rear suspension plate set. Contains soft, medium and hard plates. Softer than the MZW409, which is 0.6mm thick.

Carbon rear suspension plate for MM/LM/MM2. Contains 3 pcs of soft plates.

Aluminum motor mount for the MR-03LM.
High precision machined product made in Japan.
Highly balanced left-right weight distribution contributes to superior traction.
The design supports the LL (98mm) wheelbase as well.  Works best with the MZW310 Inner Tube Roll Shock Set.

※It is not possible to drive with auto scale alone. In addition, some bodies cannot be mounted depending on the chassis.

Optional parts for MR-04.

※It is not possible to drive with auto scale alone. In addition, some bodies cannot be mounted depending on the chassis.
※The separately sold LED light unit set (No.MZW429R) cannot be installed on the ASC MR-03W-LM Sauber-Mercedes Gruppe-C-Rennsportwagen C9, Nr.63, LM 1989.

Optional parts for MR-04 EVO2

Spare parts for MR-04 EVO2

Spare parts for MR-04 EVO2

Spare parts for the IFW613

Optional parts for the INFERNO MP9/MP10. Reinforced Servo Saver than existing one, increases the hardness and steering response.

Spare parts for INFERNO MP10e Readyset

■Length 165.0mm
■Width 71.0mm
■Height 50.0mm
■Wheelbase 94.0mm（L）
■Tread F : 59.5mm R : 59.5mm
■Chassis MA-020-N
■Front Wheel Offset Narrow +1.5mm
■Rear Wheel Offset Narrow +1.5mm
■R/C System Syncro KT-531P

<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 165.0mm
■Width 71.0mm
■Height 50.0mm
■Wheelbase 94.0mm（L）
■Tread F : 59.5mm R : 59.5mm
■Chassis MA-020-N
■Front Wheel Offset Narrow +1.5mm
■Rear Wheel Offset Narrow +1.5mm
■R/C System Syncro KT-531P

<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Overall length 180.0mm
■Overall width 78.0mm
■Overall height 40.0mm
■Wheelbase 102.0mm (3L) ■
Tread Wide
■Chassis used RWD (MR-03)
■Motor mount LM
■Front wheel offset Narrow +1.5mm
■Rear wheel offset Wide + -0.0mm
■Used radio Syncro KT-531P

<Ready set contents>
●Factory-assembled chassis
●Factory-assembled plastic body with painting and markings
●Syncro KT-531P 2.4GHz transmitter
●Set of parts for changing front tread ●Front
suspension spacer for adjustment
●6T/7T/8T/9T pinion gear
●Wheels Wrench
● Pinion removal tool
● Spare wheel nut
● Pairing stick
● Tire and wheel included

<Things required for driving>
●4 AAA alkaline batteries for running
●4 AAA alkaline or nickel metal hydride batteries for transmitter

■Operating Voltage: 4.8-6.0V
■Size：L35.9mm W15.1mm H28.6mm
■Speed：0.13sec/60°
■Torque：4.5kgf・cm
■Weight：30g
■Led Wire：150mm
■Serration：25 / for FUTABA・KYOSHO

・Servo x1
・Horn A x1
・Horn B x1
・Horn C x1
・3ｘ5ｘ1mm Spacer x1
・Eyeletｘ4
・Screw 2.3x12mm x4
・Screw 2.6ｘ6ｍｍｘ1
・Grommetｘ4

■Length 182.0mm
■Width 78.0mm
■Height 43.0mm
■Wheelbase 98.0mm （LL）
■Tread F:66.5mm R:65.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +2.5mm(for RWD)
■Rear Wheel Offset Wide +3.0mm(for RWD)
■Weight 130g
■R/C System Syncro KT-531P

<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels

<Required for Operation>
●AAA-size alkaline batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for transmitter

■Length 165.0mm
■Width 70.0mm
■Height 46.0mm
■Weight 193g
■Wheelbase 94.0mm（L）
■Tread F : 59.5mm R : 59.5mm
■Chassis MA-020-N
■Front Wheel Offset Narrow +1.5mm
■Rear Wheel Offset Narrow +1.5mm
■R/C System Syncro KT-531P

<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

Machined aluminum upper sus arm realizes direct spring effect.

■Length 163.0mm
■Width 67.0mm
■Height 51.0mm
■Wheelbase 94.0mm（L）
■Tread F : 56.5mm R : 56.5mm
■Chassis MA-020-N
■Front Wheel Offset Narrow +-0.0mm
■Rear Wheel Offset Narrow +-0.0mm
■R/C System Syncro KT-531P

<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 163.0mm
■Width 67.0mm
■Height 51.0mm
■Wheelbase 94.0mm（L）
■Tread F : 56.5mm R : 56.5mm
■Chassis MA-020-N
■Front Wheel Offset Narrow +-0.0mm
■Rear Wheel Offset Narrow +-0.0mm
■R/C System Syncro KT-531P

<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 175.0mm
■Width 72.8mm
■Height 52.0mm
■Weight 180g
■Wheelbase 90.0mm（M）
■Tread F : 56.5mm R : 56.5mm
■Chassis MA-020-N
■Front Wheel Offset Narrow +-0.0mm
■Rear Wheel Offset Narrow +-0.0mm
■R/C System Syncro KT-531P

<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 175.0mm
■Width 72.8mm
■Height 52.0mm
■Weight 180g
■Wheelbase 90.0mm（M）
■Tread F : 56.5mm R : 56.5mm
■Chassis MA-020-N
■Front Wheel Offset Narrow +-0.0mm
■Rear Wheel Offset Narrow +-0.0mm
■R/C System Syncro KT-531P

<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.

■Length 181.2mm
■Width 78.0mm
■Height 47.75mm
■Wheelbase 98.0mm （LL）
■Tread F:66.5mm R:65.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +2.5mm(for RWD)
■Rear Wheel Offset Wide +3.0mm(for RWD)
■R/C System Syncro KT-531P

<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels

<Required for Operation>
●AAA-size alkaline batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for transmitter

■Length 173.0mm
■Width 78.0mm
■Height 45.0mm
■Wheelbase 98.0mm （LL）
■Tread F:67.5mm R:65.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +3.0mm(for RWD)
■Rear Wheel Offset Wide +3.0mm(for RWD)
■Weight 169g
■R/C System Syncro KT-531P

<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels

<Required for Operation>
●AAA-size alkaline batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for transmitter

■Length 173.0mm
■Width 78.0mm
■Height 45.0mm
■Wheelbase 98.0mm （LL）
■Tread F:67.5mm R:65.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +3.0mm(for RWD)
■Rear Wheel Offset Wide +3.0mm(for RWD)
■Weight 169g
■R/C System Syncro KT-531P

<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels

<Required for Operation>
●AAA-size alkaline batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for transmitter

■Length 155.0mm
■Width 70.0mm
■Height 50.0mm
■Wheelbase 90.0mm（M）
■Tread F : 57.5mm R : 57.5mm
■Tire F : Φ25.0mm×8.5mm R : Φ25.0mm×8.5mm
■Gear ratio 7.23、6.38、5.71、5.97、5.34、4.97、4.5：1
■Front Wheel Offset Narrow +0.5mm
■Rear Wheel Offset Narrow +0.5mm
■R/C System Syncro KT-531P
■Weight 193g

<Readyset Contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 155.0mm
■Width 71.0mm
■Height 48.0mm
■Wheelbase 90.0mm（M）
■Tread F : 58.5mm R : 58.5mm
■Tire F : Φ25.0mm×8.5mm R : Φ25.0mm×8.5mm
■Gear ratio 7.23、6.38、5.71、5.97、5.34、4.97、4.5：1
■Front Wheel Offset Narrow +1.0mm
■Rear Wheel Offset Narrow +1.0mm
■R/C System Syncro KT-531P
■Weight 193g

<Readyset Contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

Option Parts for ULTIMA RB6

Machined aluminum wheel hub. Increased durability.

Spare parts for MAD WAGON

Option parts for the Fazer Mk2. CNC machined aluminum front hubs allow precise and linerar steering response and smooth suspensionmovement. Allows camber angle adjustments.

Option parts for the Fazer Mk2. CNC machined aluminum rear hubs allow smoother suspension movement. Allows 2 camber angle adjustments.

■Size
Overall：W360 X L560 X H550(mm)
Inner dimensions of one of the inner boxes：W325 X L505 X H160(mm)

■Carrying Bag for1/8
■Considerable materials for heavy duty use.
■Chic black color.
■Plastic cardboard for shelves
■Outside pocket equipped.
■Equipped with multipurpose slit and travel carrier.

Spare parts for MAD WAGON

Spare parts for MAD WAGON

Spare parts for MAD WAGON

Spare parts for MAD WAGON

Option Parts for INFERNO GT2 Type-R.

Spare Parts for SCORPION 2014