- New
- Out-of-Stock
There are 349 products.
Active filters
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
MZW709 Friction Damper Set...
For the MR-04 EVO2 chassis. Friction shock for the MR-04MM, featuring carbon plates. It contributes to improved vehicle stability at high speeds. The set includes three springs of varying stiffness levels. The friction shock is compatible with the standard pitching shock and the MZW432B rear oil shock. It can also be used with the MZW708 aluminum oil shock mount.
Price
$96.00
- Out-of-Stock
IFW643 KPI Front Knuckle...
Optional parts for the 1/8 Inferno MP10 Buggy series. The standard knuckle has a kingpin angle of 0°, while this set features knuckles with 7°kingpin angle. This design reduces front tire catching, particularly in high-speed corners, allowing for higher cornering speeds. It also improves stability, enabling the vehicle to better absorb sudden movements caused by surface gaps or irregularities.
Price
$199.00
- Out-of-Stock
- Out-of-Stock
MZW437 FRP Rear Sus. Plate...
0.5mm-thick FRP rear suspension plate set. Contains soft, medium and hard plates. Softer than the MZW409, which is 0.6mm thick.
Price
$24.45
- Out-of-Stock
MZW403S Carbon Rear Sus....
Carbon rear suspension plate for MM/LM/MM2. Contains 3 pcs of soft plates.
Price
$26.48
- Out-of-Stock
MZW309 MJ Aluminum Motor...
Aluminum motor mount for the MR-03LM.
High precision machined product made in Japan.
Highly balanced left-right weight distribution contributes to superior traction.
The design supports the LL (98mm) wheelbase as well. Works best with the MZW310 Inner Tube Roll Shock Set.
Price
$162.99
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
IFW459C Servo Saver Assy...
Optional parts for the INFERNO MP9/MP10. Reinforced Servo Saver than existing one, increases the hardness and steering response.
Price
$52.97
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
82278 Mini Servo KS3031-04M...
■Operating Voltage: 4.8-6.0V
■Size：L35.9mm W15.1mm H28.6mm
■Speed：0.13sec/60°
■Torque：4.5kgf・cm
■Weight：30g
■Led Wire：150mm
■Serration：25 / for FUTABA・KYOSHO
・Servo x1
・Horn A x1
・Horn B x1
・Horn C x1
・3ｘ5ｘ1mm Spacer x1
・Eyeletｘ4
・Screw 2.3x12mm x4
・Screw 2.6ｘ6ｍｍｘ1
・Grommetｘ4
Price
$84.78
- Out-of-Stock
MZW415B Aluminum Upper Arm...
Machined aluminum upper sus arm realizes direct spring effect.
Price
$80.74
- Out-of-Stock
MZW120OR Mini-Z SP tool...
Kyosho 60th anniversary limited model.
A tool set suitable for MINI-Z. Improved tool tip shape and various usable tools included!Comes with a soft case with a MINI-Z logo.
- Nut driver: 3.5mm, 4.0mm, 4.5mm
- Philips screwdriver: #00, #0, #1
- Hex screwdriver: 1.5mm
Price
$69.64
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
FAW205 HD Front hub...
Option parts for the Fazer Mk2. CNC machined aluminum front hubs allow precise and linerar steering response and smooth suspensionmovement. Allows camber angle adjustments.
Price
$76.70
- Out-of-Stock
FAW206 HD Rear hub (FZ02/2pcs)
Option parts for the Fazer Mk2. CNC machined aluminum rear hubs allow smoother suspension movement. Allows 2 camber angle adjustments.
Price
$72.67
- Out-of-Stock
87615C KYOSHO Carrying Bag L
■Size
Overall：W360 X L560 X H550(mm)
Inner dimensions of one of the inner boxes：W325 X L505 X H160(mm)
■Carrying Bag for1/8
■Considerable materials for heavy duty use.
■Chic black color.
■Plastic cardboard for shelves
■Outside pocket equipped.
■Equipped with multipurpose slit and travel carrier.
Price
$150.38
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
74031 KE21SP Engine
High RPM and torque .21 size big block engine. Easy to tune with recoil starter.
*This product does not come with a break-in ring.When you break in, please use the accessories that came with the Readyset when you purchased it.
Price
$251.31
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
MZW446 Gyro unit set(for...
Gyro unit for MINI-Z readyset. Compatible with blue board RC units, or green board RC units with a blue marking on the gyro connector.
Price
$36.33
- Out-of-Stock
- Out-of-Stock
IGB112OR 2020 Mercedes-AMG...
Complete body set for the Inferno GT2. Licensed 2020 Mercedes AMG GT3 body. Wheelbase : 360mm / Body Dimensions : 661 x 310 x 164mm(With rear wing)
Price
$302.78
- Out-of-Stock
FAW216 Aluminum Damper Set...
Aluminum big bore shocks for Rage 2.0. Threaded large capacity shock bodies.
Price
$84.78
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
GPW20 Steering Servo for...
Mini steering servo for the Hang On Racer. Bolt on ready. 150mm wire with JR type no flange connector housing. Screw and aluminum collar included.
Price
$43.70
- Out-of-Stock
- Out-of-Stock
MXW006B Mini-Z 4x4...
Rocky terrain for the MINI-Z 4x4. A set of 5 pieces of 480 x 480 x 103mm terrain. Making a square with four pieces and putting the 5th one on the center of the square will make a 960 x 960 x 156mm terrain, and you can enjoy wide variety of terrain by rotating each piece. Even larger terrain can be made using multiple sets.
Price
$121.22
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
MAB074 USA-1 Non Decoration...
USA-1 clear body set with plastic parts. Compatible with 8th scale monster trucks. Includes chrome body parts, decals and masking sheet. Light buckets are compatible with LED optional headlights(97054 / headlights x 8 , Tail lights x 2 and fog lamp x 5). Wheelbase : 360mm / Body dimension : 539 x 206 x 142mm(Without side mirrors & fog lamps)
Price
$183.36
- Out-of-Stock
- Out-of-Stock
MZW124 X-SPEED MINI-Z Motor...
[Contents]
・ Motor checker body
・ Power cable with super plug ・
O-ring for fixing motor x2 (1 is spare)
・ Rotation adapter x2 (1 is spare)
・ Wiring cable with alligator clip for brush motor
・ Instruction instructions book
[Items that need to be purchased separately] -Battery
motor or brushless motor for minutes (measurement target)
-Battery with super plug from 5.5V to 7.4V (maximum voltage up to 8.4V)
or MZW124-02 AC adapter (6V- 2A / For Japan)
Price
$172.16
- Out-of-Stock
MBW027RB Setting Steering...
Steering plate set. 5 kinds of toe angles can be selected for wider setup range.
Price
$44.82
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
36218R Shock Absorber Pits...
Recommended Stand for working on the damper. The magnet plate on the front will help preventing to lost screws.
Price
$14.26
- Out-of-Stock
72012 SPEED HOUSE Multicell...
■ Input voltage USB Type-C 5-12V (Power supply with output 3A or more compatible with Quick Charge 2.0 / 3.0 and Power Delivery is recommended)
* Please purchase the charging adapter separately.
■ Body size 120x92x34 (mm)
■ Weight 195g
■ Number of charging 1-4
■ Compatible batteries NiMH, NiZn, Li-Ion, LiHV, LiFe AAA type (AAA), AA type (AA), 10440, 10500, 12500 , 13500, 13650, 14500, 14650, 16650, 17650, 17670, 18650, 18700, 20650, 20700, 21700, 22650, 26650, 26700 * Batteries longer than 70mm cannot be used
Price
$151.79
- Out-of-Stock
- Out-of-Stock
MATH001W Monster Tire with...
Preglued USA-1 tire and wheel set. Includes 2pcs
Price
$183.36
- Out-of-Stock
FAB503 MAD VAN VE Non...
Can be mounted on the FAZER Mk2 series FZ02L-BT / FZ02L VE-BT chassis.
Body accessory parts with plated finish improve scale realism for body shell, protector parts protect the roof when turn over, polycarbonate rear spoiler, decals and masking sheets used for the ready set. Comes with decoration decals for customized body shell you wish. The LED light unit series (#97054) sold separately can be installed in the light buckets.
Finished body size: Approximately 378x154x135mm (excluding mirrors)
Price
$132.43
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
EZTH001WS...
Spare tires & white wheels for the Mad Van VE. By using with EZT001S, FA535-S20, FA535-76 and 1-S14018H, wheels can be equipped on the Rage 2.0 chassis(34411).
Price
$48.90
- Out-of-Stock
82249 KYOSHO SPEED HOUSE...
Speed controller for 60A waterproof sensorless brushless motor. Cooling fan helps to protect the ESC from overheat and supply stable power. Input voltage : 2-3S LiPo (7.4-11.1V) or 6-9S NiMH battery (7.2-10.8V). Size : 48.5x38x32mm (including cooling fan) / Continuous maximum current : 60A / Peak current : 390A / Weight : 90g / Bec output : 6V/3A
Price
$161.97
- Out-of-Stock
70615 KYOSHO SPEED HOUSE...
Sensorless brushless motor 4000kv (shaft diameter : 3.175mm) for 2S LiPo. The main body has a dustproof structure to avoid maintenance. Suitable for 1/10 On and Off-road cars. Weight : 205g
Price
$111.04
- Out-of-Stock
IFW110R 3PC Flywheel (φ34/Red)
Spare 3pcs flywheel for the Inferno NEO / NEO ST / GT2
Price
$30.56
- Out-of-Stock
IFW627 Carbon Center...
Carbon center bulk plate for the MP10. Carbon allows lighter weight without sacrificing durability.
Price
$38.71
- Out-of-Stock
R246-1356 MML Roll Damper...
Roll damper for R246-2351 MML Motor Mount. Oil damper is sold separately. Compatible dampers: R246-1360, R246-1221, and MZW432.
Price
$40.75
- Out-of-Stock
R246-1361 MM2 Aluminum...
Aluminum MM2 type motor mount.
Features:
- Precision lightweight design achieves less than 7g in weight while maintaining sufficient rigidity
- Compatible with R246-1362 roll damper as well as MZ217 standard plastic one
Price
$97.79