There are 192 products.
Active filters
2 light halogen LED and 2 light red LED light set. Connects to the Rx open slot and includes extention cords for additional light sets.
Unidirectional edge pattern high-grip tires. Realizes exceptional grip, not just on urethane, but also on carpet surfaces.
■MZW38/10 / MZW38-20 / MZW38-30 / MZW38-40
CNC machined aluminum center shaft for FZ02L chassis. Durable precision made center shaft for high power motors / high gear ratio setups.
Unidirectional edge pattern high-grip tires. Realizes exceptional grip, not just on urethane, but also on carpet surfaces.
■MZW37-20 / MZW37-30 / MZW37-40
Spring set for adjusting hardness of rear suspension. Includes 3 different hardness types.■Length：23mm
4 light clear LED light set. Connects to the Rx open slot and includes extention cords for additional light sets.
Durable steel front center shaft cup. Precision CNC machined for heavy duty use.
Sway bar set for the Fazer Mk2 series. Adjust the roll charateristics for more efficient cornering.
Optional parts for the Fazer MK2 Rage 2.0. Universal Swing shafts to replace the Swing shafts. Protects faling off the shafts when crash and improves drive efficiency.
Use for front tires on MINI-Z Racer and MINI-Z AWD. Reduces sticking on urethane surfaces for smooth running characteristics.
Ball differentials for the Fazer Mk2. Lighter(30g) than the stock gear diffs and also the plastic gears have less noise. Ball diffs have smoother cornering and more stable accelaration feel. Requires 2pcs for 1 chassis. Includes ball diff grease and Molybden grease.
Spare parts for the Fazer D2(Short size). The body mount is for the short size Fazer D2 body types. Standard overhang bodies will require the FA617 body mounts.
High precision brass link balls for smoother shock and link rod movement. A set contains 12 pcs.
Machined brass front hub. Increases the weight distribution on the front wheels for improved uphill performance.
Stunning red anodized aluminum link rods for better appearance. For 120mm wheelbase.
Optional parts for Fazer MK2 FZ02L-B (Rage 2.0). Adapter for attaching the OT252 wing. When installs the wing, improves stability at high speed running.
Option parts for the Rage / Fazer Mk2 chassis. CNC machined aluminum 75T spur gear. Best for high power motors
Durable steel rear center shaft cup. Precision CNC machined for heavy duty use.
Aluminum heat sink for the motor. Keeps motor temperture low efficiently.
1/10 RWD. Optional parts for the drift car FAZER D2.
The standard servo horn is made of resin, but by using machined aluminum, the response and holding power of the steering have been greatly improved.
Additionally, the steering feel can be adjusted by changing the distance between 17mm and 21mm.
FAW310 is for Kyosho and Futaba, while FAW311 is for Sanwa and KO.
Carbon bumper brace for FZ02 / 02L chassis. Supports bumper and increases chassis rigidity.
Machined brass rear axle cap. Increases the weight distribution on the rear wheels for improved downhill performance.
A connector that allows the LED light unit (MZW429R) to be installed in double.
* MZW439R for ICS connector is not supported.
4 light red LED light set. Connects to the Rx open slot and includes extention cords for additional light sets.
A type of LED light unit that takes power from the receiver.
Lineup of 2 lights / 4 lights and clear / red. LED can be added by connecting to the attached connector.
A pair of pre-glued tires and wheels assembled with a weight inside. Using on the front ensures excellent traction for hill climbing.
Stunning red anodized aluminum link rods for better appearance. For 110mm wheelbase.
Optional parts for the Fazer MK2 and the FZ02. Convenient tool when installing and removing front hub ball. The ball can be installed straight by tightening the cap screw without damaging the ball, as well as easy removing. Also useful when changing from nylon ball to optional the FAW218 HD ST ball.
Optional parts for the Fazer MK2 FZ02L-B (Rage 2.0). Durable wheel hubs.
Optional parts for the Fazer MK2 and the FZ02. High precision stainless steel machined ball for front hub. Improves the durability.
Optional parts for the Fazer MK2 Touring cars. Universal Swing shafts to replace the Swing shafts. Protects faling off the shafts when crash and improves drive efficiency.
Can be installed on MR-03VE, MA-015, MA-020VE and MB-011.
Machined aluminum steering blocks. Available in 0.5°, 1.5°, and 2.5° camber angles, based on the standard 0°. Similar to the MZW702, they feature a realistic design that allows adjustment of the upper arm mounting position and kingpin tilt, just like full-scale vehicles. When combined with the MZW702, fine-tuned adjustments can be made from 0°to 3°in 0.5°increments.
FAZER Optional parts for Mk2 FZ02-R.
Setting parts for adjusting grip in response to vehicle setup and road surface conditions. Contains 2 pieces of each of 3 types: Soft, Medium (equivalent to standard), and Hard.
Coil inner diameter: 16.5mm, overall coil length: 44mm, wire diameter: 1.1mm.
※You need to purchase two to make one unit.
Contents
Soft (pink / total 9 rolls) ×2
Medium (yellow / total 8 rolls) ×2
Hard (blue / total 7 rolls) ×2
Optional parts for FAZER FZ02-R.
※When used with the FZ02L-BT series, please also use Button Screws (M4x22) (Hex/5 pcs) part No. 1-S14022H.
Designed for 1/10 RWD drift cars. Optional parts for the FAZER D2 drift car. The standard servo horn is made of resin, but upgrading to a CNC-machined aluminum version significantly enhances steering response and holding strength. Additionally, the adjustable design allows fine-tuning of the steering feel by adjusting the arm length from 17mm to 21mm. FAW310 is compatible with Kyosho and Futaba, while FAW311 is compatible with Sanwa and KO.
