There are 10962 products.
MZP241YBK ASC MR03W-MM...
* You cannot drive with the auto scale alone. In addition, some bodies cannot be mounted due to the chassis.
* The optional part No. MZW411B friction damper set cannot be installed because it interferes with a part of the body.
Price
$105.94
MZW429R LED Light Clear &...
LED light unit set equipped with two white LEDs on the front and two red LEDs on the rear.
Compatible with the following models:
- MINI-Z RWD
- MINI-Z FWD
- MINI-Z AWD (with KT-531P transmitter)
- MINI-Z 4x4
- MINI-Z Buggy (with KT-531P transmitter)
- MINI-Z Buggy VE (FHSS)
- MINI-Z Sports series
Price
$16.30
30623 1/10 EP 4WD Racing...
■Length 397mm
■Width 250mm
■Height 135mm
■Wheelbase 273mm
■Tread（F／R） 212mm / 208mm
■Weight approx 1620g (with 7.2V4000 LiPo）
■Tires（F／R） φ82×30mm / φ82×36mm
■Motor 540 class size (sold separately)
■Gear ratio 8.28：1
<Kit Contents>
●Chassis
●Tire
●Wheel
●Clear body＆underbody
●Decals
●Hexagon wrench
●Cross wrench
●Shock wrench
●Grease
●#200Shock oil
●Ball Differential Grease
＜Required for Operation＞
●2 channel R/C system
●Servo
servo size：L41xW21xH38mm
●540Motor
●ESC
ESC size：L40xW42xH29.5mm
●Battery for chassis
Battery size:L140xW50xH25mm
●Batteries for transmitter
●Charger for battery
●Paint for body
Price
$659.00
IFW642-3 Wing Washer (for...
Optional parts for Inferno MP10/MP10e/MP10T/MP10Te
Price
$20.37
34412T2 MAD VAN Color Type2...
■Length 383mm(Including body)
■Width 323mm(Including body)
■Height 200mm(Including body)
■Wheelbase 274mm
■Tread (F/R) 250mm
■Tires (F/R) φ110×70mm
■Gear Ratio 11.69:1
■Motor G14L
■Weight 2,050g (approx.)(When using 7.2V3600 NiMH)
<Readyset Contents>
●Factory assembled chassis with built in R/C unit
●Factory finished body with decals applied
●Syncro KT–231P+ transmitter
●Hex wrench
●Integrated spanner
●Setting change parts
<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools
Price
$324.96
34492T1 1970 Dodge Charger...
■Length 507mm
■Width 195mm(Body width:210mm)
■Height 128mm
■Chassis Height 15mm(approx.)
■Wheelbase 274mm
■Tread (F/R) 167mm
■Tires (F/R) Fφ64×27.7mm
■Gear Ratio 6.54：1
■Weight 1680g (approx.)
■R/C system Syncro KT-231P+
■Motor TORX10E
<Kit Content>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts
<Require to run>
<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools
Price
$487.95
IS205H Rear Lower...
Option parts for INFERNO MP10T. Harder suspension arm than standard one to improve hardness. Setting parts according to road surface.
Engraved for identification.
Price
$28.52
IF624-65 HD Sus. Shaft...
Spare parts for MP10
Increased durability and reliability is achieved with larger φ4.5mm diameter inner hinge pins compared to the φ4.0mm hinge pins on the MP9 TKI4.
Price
$14.26
IF605 Hard Rear Shock...
Spare parts for MP10
Based on the suspension geometry of the MP9 TKI4 shock stay, the number of shock and upper arm mounting holes has been optimized. In addition, the reinforced rear shock stay delivers increased strength and prevents dirt catching.
Price
$112.06
SANWA RX 493 M17 2.4GHz...
Compact receiver
Waterproof
Plug in Bind
Short Coaxial Antenna
●2.4 GHz FHSS5 Spread Spectrum System 4ch
●Compatible with Telemetry
※Cannot connect RPM sensor and Temperature sensor
To measure RPM and Temperature is only
combine with SUPER VORTEX series
●Compatible with SSL (SUPER VORTEX Series, etc...)
●Ultra Response Mode (SUR)
●Extreme Response Mode (SXR)
●Waterproof
●The smallest and most light receiver in the class
Price
$151.79
- -$7.90
LTC-R (Rubber) Clear Body...
- 4-Time IFMAR World Champion Body (2010, 2012, 2014, 2016)
- Attractive Contemporary Styling & Improved Downforce Front and Rear
- Fits Global Body Spec Rules Package
- EFRA APPROVED #4018
- Made in the USA
Regular price
$37.90
Price
$30.00
FAW210 HD Center Shaft L...
CNC machined aluminum center shaft for FZ02L chassis. Durable precision made center shaft for high power motors / high gear ratio setups.
Price
$14.26
PL1305A INTERCHANGEABLE HEX...
INTERCHANGEABLE HEX DRIVER SET
(1.5; 2.0; 2.5; 3.0mm)
Price
$28.42
