There are 10962 products.
IFS005-816 Big Shock Spring...
Optional front springs for the MP10/MP10e. Thicker and more coil turn allowing stiffer characteristics. Best for high speed and high traction surfaces.
Price
$28.26
SC222-04 Shock Gasket 10mm...
Shock gasket for 10mm oil shocks of Scorpion series. Contains 4 pieces.
Price
$6.06
37034 LE MANS 240 GOLD...
Based on the 240S 4WD (15.5T), this 240 gold motor (13.5T) has been enhanced for higher rev. Best matched for the Optima series.
Price
$170.56
34417T2 1:10 Scale Radio...
<Kit Contents>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts
<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools
Price
$352.23
OSR21GTC2 O.S. Speed R21 GT...
Spec:
- 3.49 cc / 0.213cu.in.
- Bore: 16.08mm / 0.633 in.
- Stroke: 17.20mm / 0.677 in.
- Output: 2.65 ps / 2.61 hp / 34,000 r.p.m.
- Practical rpm range: 4,000-42,000 r.p.m.
- Weight: 362g / 12.77 oz.
Price
$712.07
MZP451S ASC MA020W DODGE...
Exquisite finish and realistic appearance. A complete body series that can be enjoyed as a high-quality display that provides the joy of decorating.
* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.
Price
$118.17
LRP430410 ANTIX BY LRP 9000...
TECHNICAL DATA
Nominal voltage - 7.6V
C-rate - 45C
Style - Hardcase
Connector - US-Style
Balancing - connectorXH
Application - On/Offroad
Length - 137mm
Width - 47mm
Height - 25mm
Weight - 352g
Capacity - 9000mAh
Price
$131.41
OTW136 HD Front Shock Stay...
CNC machined 3mm thick carbon shock stay. The strength is significantly improved compared to the normal FRP product
Price
$40.75
37051B Le Mans 240S ESC...
Internal resistance: 0.0011Ω
Continuous maximum current: 60A
Instantaneous maximum current: 80A
Maximum KV value (2S): 13.5T 3200KV
Driving mode: Forward / brake / forward / brake / reverse
Input voltage: 7.2V-11.1V
Compatible motor type: Sensor & Sensorless
BEC output: 6V / 2A
size (mm): 37.5 x 30.8 x 18.7
Weight (g): Approximately 80
Price
$121.22
IFW631B Carbon Front Shock...
Carbon front shock tower for the MP10 / MP10 TKI2 / MP10e. Designed to use with MP10TKI2 long shocks. Light weight and durable carbon allows lower CG. The slightly more flex feel allows a different feel than the aluminum shock towers. A great setup option for various tracks
Price
$136.00
FAW202-01 Axle Bushing (4pcs)
Spare bushings for FAW202 & FAW203. Includes 4 bushings.
Price
$4.07
FA540-41 Metal Ring Gear...
Spare part for the Mad Van VE. It can be used on the standard Mad Van(34412T1) as an option. Durable sintered metal materila.
Price
$26.49
FA535-76M Metal Spur Gear...
Sintered 76T Spur gear for the Mad Van VE. Good optional part for the Mad Van.
Price
$32.60
IFW626 Carbon Upper Plate
Carbon front upper plate for the MP10. Carbon allows lighter weight without sacrificing durability.
Price
$52.97
MZW123 MINI-Z Case (With...
Handy multiuse case with a MINI-Z logo.
Comes with an internal tray with separating plates for flexible space arrangement.
It can also be used as a storage/protection box for an on-road type MINI-Z (see below for maximum dimensions).
Dimensions: approx. 201 x 108 x 52mm
Maximum MINI-Z size: approx. 187 x 95 x 48mm
Price
$10.19
IFTH005W Dish Wheel with...
Spare parts for the INFERNO MP9 TKI4 V2/MP9e Evo. V2 / can also be used for other 1/8 buggy.
Price
$61.12
EFW001G Wing(Gold/FANTOM...
Polycarbonate Wing with gold anodize Wing Holder for FANTOM EP 4WD. Improves rear tire grip by installing it, and stability of straight running and cornering at high speed range are also improved.
Price
$24.45
IF296GM Front Shock Stay...
Front shock stay (5.0mm thick) for the INFERNO MP9 TKI4 V2/MP9e Evo. V2 Readyset
Price
$28.52
IFW623 HD Front Shock...
Optional parts for INFERNO MP10. Front Shock Stay for IF484 MS Shock set.
Changed the existing shock mounting hole position to upper side.
Allows a longer shock travel than standard, which improves the performance when landing of jumps and bumpy section.
Price
$101.87
SANWA PGS-LH II High Speed...
●FH5U: SXR(SANWA XTREME RESPONSE) MODE-COMPATIBLE
●SSL-COMPATIBLE PROGRAMMABLE SERVO
# Compatible with CODE 10 (M12S, EXZES ZZ, MT-44)
Not Compatible with CODE 5 (M12, EXZES Z, MT-4S, MT-4, MT-S)
●PGS SETTING GEAR-COMPATIBLE
●SUPER RESPONSE (SSR) MODE-COMPATIBLE
●HIGH RESPONSE (SHR) MODE-COMPATIBLE
●Li-Po 2 CELL-COMPATIBLE
●LOW PROFILED
●HIGH SPEED TYPE
●BRUSH LESS MOTOR
●FULL ALUMINUM CASE
●FULL METAL GEAR (Strengthening Gears)
●AL HEAT SINK
●Black Harness
Price
$202.72
FAW214 Metal Servo Saver...
Optional parts for the Fazer MK2 and the FZ02. High precision machined servo saver. Improves the steering feel for accurate operation.
Price
$91.68
IS204H Front Lower...
Option parts for INFERNO MP10T. Harder suspension arm than standard one to improve hardness. Setting parts according to road surface.
Engraved for identification.
Price
$24.45
FAW217 HD Motor Mount (FZ02)
CNC machinedC aluminum motor mount. Red anodied motor mount fits all Fazer Mk2 chassis
Price
$34.64
SWPGSCL2 Sanwa Servo PGS CL...
●FH5U: SXR(SANWA XTREME RESPONSE) MODE-COMPATIBLE
●SSL-COMPATIBLE PROGRAMMABLE SERVO
# Compatible with CODE 10 (M12S, EXZES ZZ, MT-44)
Not Compatible with CODE 5 (M12, EXZES Z, MT-4S, MT-4, MT-S)
●PGS SETTING GEAR-COMPATIBLE
●SUPER RESPONSE (SSR) MODE-COMPATIBLE
●HIGH RESPONSE (SHR) MODE-COMPATIBLE
●Li-Po 2 CELL-COMPATIBLE
●HIGH TORQUE TYPE
●BRUSH LESS MOTOR
●FULL ALUMINUM CASE
●FULL METAL GEAR (Strengthening Gears)
●AL HEAT SINK
●Black Harness
Price
$100.85
IFW611-0 Brass Front Hab...
New 0 degrees hub carrier brass bushing inserts for the Inferno MP9 / 10. Increased durability and more weight to increase traction.
Price
$28.52
82041 MINI-Z EVO Receiver...
Reciver unit for the MINI-Z EVO chassis.
Supports the KT-531 and KT432PT transmitters.
Price
$60.10
IFW604-10 Front Chassis...
Optional parts for the INFERNO MP10/MP9e Evo.
New setting weights by 10g and 20g which can be installed the main chassis.
Can be adjusted the weights in 10g/20g/30g/40g by weights combination.
Fixing by screws and nylon nut which prevents falling off when driving.
Price
$40.75
OTW129 Gold Damper Rear...
Spare parts for the TURBO OPTIMA. Optional parts for the OPTIMA and JAVELIN.
Price
$85.57
IFW601C Titanium Rod Set...
Reduces the weight of chassis by using lightweight titanium rods.
Improves steering response and suspension movement. Includes Upper Rods for Front & Rear, Steering Tie Rods and Steering Servo Rod, 7pcs in total.
Price
$224.11
IF460-2.9 Rear Sway Bar...
Optional parts for the INFERNO MP9/MP10.
Currently line-up from 2.1mm to 2.8mm by 0.1mm difference. Add new item by 2.9mm to increase setting variety.
Price
$10.00
