■Length 177.0mm
■Width 79.5mm
■Height 44.0mm
■Chassis MR-04W-LM
■Wheelbase 102.0mm （3L）
■Tread F:67.5mm R:65.0mm
■Front Wheel Offset Narrow +3.0mm
■Rear Wheel Offset Wide +1.0mm
■Weight 168g
■R/C System Syncro KT-531P

<Readyset Contents>
●Factory assembled chassis
●Pre-painted body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Pinion gears 6T, 7T, 8T, 9T
●Spare nuts
●Wheel wrench
●Pinion gear tool
●Tires, wheels

<Required for Operation>
●AAA-size alkaline batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for transmitter

Spare parts for the Ultima SB Dirt Master.

Optional parts for the MR-04. A ball set with three different seat thicknesses designed for the balls mounted on the lower suspension arms. The standard setup includes a 1.0mm plastic spacer, but replacing it with the 1.0mm ball from this set helps prevent the plastic spacer from being lost and also helps prevent the knuckle arms from detaching. The 0.3mm and 0.5mm balls can be combined with plastic spacers to adjust the ride height.

<Contents>
0.3mm ball with seat x 2
0.5mm ball with seat x 2
1.0mm ball with seat x 2

No. 30222

■Length 143.5mm
■Width 70.0mm
■Height 56.0mm
■Chassis MR-04N-HM
■Wheelbase 90.0mm （M）
■Tread F:59.5mm R:57.0mm
■Front Wheel Offset Narrow +1.5mm
■Rear Wheel Offset Wide -1.0mm
■Weight 169g
■R/C System Syncro KT-531P KT-531P

<Readyset Contents>
●Factory assembled chassis
●Pre-painted body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Pinion gears 6T, 7T, 8T, 9T
●Spare nuts
●Wheel wrench
●Pinion gear tool
●Tires, wheels

<Required for Operation>
●AAA-size alkaline batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for transmitter

Optional parts for FAZER MK2.

■Length 207.0mm
■Width 88.5mm
■Height 90.0mm
■Chassis Type MX-01
■Wheel Base 120mm
■Tread F/R:72.7mm
■Weight 242.0g (excl. battery)
■Motor/Engine 130 Class
■Gear Ratio 55.44：1/46.20：1/39.60：1/34.65：1/30.80：1/27.72：1 　
■Front Tire Diameter Φ37.0mm
■Rear Tire Diameter Φ37.0mm
■Front Tire Width 12.0mm
■Rear Tire Width 12.0mm
■Battery 4 x AAA alkaline
■Transmitter Syncro KT-531P
■Speed Approx. 2.7km/h〜5.4km/h
■Running Time Approx. 60 mins

<Kit Content>
●Complete chassis with built-in electronics.
●Factory-painted body complete with many fine details
●KT-531P 2.4GHz transmitter
●Pinion gear set（10T、12T、14T、16T、18T、20T）
●3 types of pinion gear spacers

<Require to run>
●4 x AAA batteries for the transmitter
●4 x AAA batteries for chassis （Alkaline or NiMH）

<Kit Contents>
●Chassis kit
●Adhesive shaped tire
●Unpainted body
●Decal
●Wheel wrench（12/4.0）
●5.5/5.0wrench
●Hexagonal wrench
●Caster angle jig
●Shock wrench
●Shock oil
●Ball differential grease

<Required for Operation>
●Radio transmitter with 2 channel, 1-servo(Receiving size: Max 37x30x16.5mm / Servo size: Max 37x16.5x30mm )
●1 Electronic speed controller (ESC size：38x31x23mm)
●540 Class Motor
●Battery for chassis(Battery size：138x48x24.5mm)
●Batteries for transmitter
●Charger for Battery
●Paint for body

■Length 168.0mm
■Width 72.0mm
■Height 50.0mm
■Wheelbase 90.0mm（M）
■Tread   F : 56.5mm R : 56.5mm
■Chassis MA-020-N
■Front Wheel Offset Narrow +-0.0mm
■Rear Wheel Offset Narrow  +-0.0mm
■R/C System Syncro KT-531P

<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Syncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

Spare Parts for OPTIMA

MP10Te high grade machined aluminum motor mount. Designed for installing long can brushless motors. It can be used with short can motors allowing the motor to be set back for adjusting weight distribution. Can be installed on the MP10e TKI2.

Spare parts for INFERNO MP9e Evo. Readyset

■Length 193mm
■Width 84mm
■Height 90.0mm
■Chassis Type MX-01
■Wheel Base 120mm
■Tread F/R:72.7mm
■Weight 242g (excl. battery)
■Motor/Engine 130 Class
■Gear Ratio  55.44：1 / 46.20：1/39.60：1 / 34.65：1/30.80：1 / 27.72：1 　
■Front Tire Diameter Φ37.0mm
■Rear Tire Diameter Φ37.0mm
■Front Tire Width 12mm
■Rear Tire Width 12mm
■Battery 4 x AAA Alkaline
■Transmitter Syncro KT-531P
■Speed：Approx. 2.7km/h〜5.4km/h  (Pinion gears 10T〜 20T)
■Running Time Approx. 60 mins

<Kit Contain>
●Complete chassis with built-in electronics.
●Factory-painted body complete with many fine details
●KT-531P 2.4GHz transmitter
●Pinion gear set（10T、12T、14T、16T、18T、20T）
●3 types of pinion gear spacers

<Required to run>
●4 x AAA batteries for the transmitter
●4 x AAA batteries for chassis （Alkaline or NiMH）

Optional parts for FAZER Mk2 FZ02-R

Optional parts for FAZER Mk2 FZ02-R.

※Substitution parts for RM11

■Length 395mm
■Width 245mm
■Height125mm
■Wheelbase 268.5mm
■Tread（Ｆ／Ｒ） 209mm／201mm
■Tire F:φ88×33mm R:φ88×40mm
■Gear Ratio 8.13：1
■Weight 約1,450g
■Motor (sold separately)

＜ Kit Contents＞
●Unassembled kit set
●Body
●Wing
●Tire
●Wheels
●Pinion Gear(24T)
●Ring Gear Grease
●Hex wrench（1.5mm/2.0mm/2.5mm）
●Cross wrench

< Required for operation >
■2ch-3ch R/C car transmitter
■Servos
■ESC
■Motor
■Silicon oil for Shock
■Batteries for receiver
■Charger for battery
■Paint for body
■Tool

Spare Parts for RB6. 6

Spare parts for KB10L Toyota Tacoma.

Spare parts for KB10L Toyota Tacoma.

Spare parts for the MP10T

※Spare Parts for MINI-Z Racer MR-03

■Length 202.0mm
■Width 95.0mm(Both ends of the tire)
■Height 96.0mm
■Chassis Type MX-01
■Wheel Base 120mm
■Tread F/R:77.0mm
■Weight 247.6g (excl. battery)
■Motor/Engine 130 Class
■Gear Ratio 55.44：1/46.20：1/39.60：1
                    34.65：1/30.80：1/27.72：1
■Front Tire Diameter Φ40.5mm
■Rear Tire Diameter Φ40.5mm
■Front Tire Width 18.0mm
■Rear Tire Width 18.0mm
■Battery 4 x AAA Alkaline
■Transmitter Syncro KT-531P
■Speed：Approx. 2.7km/h〜5.4km/h  (Pinion gears 10T〜 20T)
■Running Time Approx. 60 mins

Kit Content
●Complete chassis with built-in electronics.
●Factory-painted body complete with many fine details
●KT-531P 2.4GHz transmitter
●Pinion gear set（10T、12T、14T、16T、18T、20T）
●3 types of pinion gear spacers

Require to run
●4 x AAA batteries for the transmitter
●4 x AAA batteries for chassis （Alkaline or NiMH）

Spare parts for Mad Bang. This product must be used in combination with FA535-76 Spur Gear 76T FZ02L-B when using EZTH001BKS tires for Rage 2.0.

Spare parts for the Ultima SB Dirt Master.

Spare Parts for V-One R4 Evo

Spare Parts for V-One R4 Evo

Spare parts for the MAD CRUSHER / FO-XX. Updated version of MA004R. Cannot be used with MA002. Must use together with MA353 and MA354.

2-Speed Transmission gear unit for the Inferno GT2 series.

* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.

●Scale approx. 1/28
●Product size: L164 x D73 x H45 (mm) ● Body
weight: approx . Mode: 7km/h / Racing mode: 10km/h ●Operable distance: approx. 30m ●Frequency: 2.4GHz (12 units can run simultaneously) ●Continuous running time: approx. 60 minutes (when using new alkaline batteries) ●Target age: 6 years old that's all

KIT CONTENTS

■Length 472mm
■Width 350mm
■Height 198mm
■Wheelbase 295mm
■Tread F/R 278mm
■Tires（F & R） φ128 x 70mm
■Gear Ratio 15.22：1
■Weight 3,610g (approx.)
■Motor TORX10L Brushless Motor kv2850

<Readyset Contents>
●Factory assembled chassis complete with control linkages
●Pre-cut and painted body complete with decals applied
●2.4GHz Syncro KT-231P+ transmitter
●1.5mm/2.0mm/2.5mm L shaped hex wrench
●Cross wrench
●4/5/5.5/7/10mm Integrated spanner

<Required to operate>

●AA-size batteries x 4 for transmitter
●Battery for driving (2-3S LiPo battery *Installable battery size 143x47x30mm)
●Charger for LiPo battery

CNC machined 2mm thick carbon upper deck. Achieves increased strength and weight reduction of approximately 5g compared to normal FRP products.

Optional parts for Optima

Spare Parts for LAZER ZX-6 (LAW54)

Spare Parts for LAZER ZX-6 (LAW54)

Option Parts for INFERNO GT/GT2.
※IGW001 (Substitution parts)

Aluminum knuckles. Provides increased rigidity and better appearance.

Spare part for the Inferno GT2.

Spare parts for the KE21SP engine.

■Length 660mm
■Width 160mm
■Height 325mm
■Weight 1,530g approx.
■Motor 550-class G14L motor with water-cooling jacket
■propeller Size D31 x P1.4 (polycarbonate)
■Maximum Speed 21km/h approx.
■Operation time 5 minutes 30 seconds approx.

＜ Kit Contents ＞
●Pre-colored surf board installed with R/C system, complete with linkages
●Complete pre-painted surfer figure
●KT-231P+2.4GHz 2ch pistol grip type transmitter
●7.2V-22HV NiMH battery
●Ni-MH battery dedicated delta peak USB charger
●Styrofoam slipway
●Spare ladder

＜ Required for Operation ＞
●AA batteries x 4 for transmitter

Domestic limited 250

Spare Parts for V-One R4 Evo

Spare parts for the IFW602. Includes 30mm small high power cooling fan with extension cord for Inferno MP10e.

Clamp Type Rear Wheel Hub for the FANTOM EP 4WD. Lightweight gold anodized hub & collar set. Prevents damage to shaft due to core deviation and screws.

Spare parts for the MAD CRUSHER / FO-XX. Updated version of MA002. Cannot be used with MA004F / MA004R. Must use together with MA353 and MA355/MA356.

Spare Parts for SCORPION 2014

Spare Parts for OPTIMA

■Length 595mm
■Width 220mm
■Height 350mm
■Weight 1,600g approx.
■Transmitter KT-231P+
■ESC KYOSHO SPEED HOUSE
          KA060-91W
■Servo KS4031-06W
■Motor 550-class G14L motor with water-cooling jacket
■Battery 7.2V-2200mAh NiMH
■Compatible battery size L148xW52xH30mm or less
■Charger Ni-MH battery dedicated USB charger
■Propeller D31xP1.4 (Polycarbonate)
■Maximum speed 24km/h approx.
■Operation time 5 min approx.

■Length 595mm
■Width 220mm
■Height 350mm
■Weight 1,600g approx.
■Transmitter KT-231P+
■ESC KYOSHO SPEED HOUSE
          KA060-91W
■Servo KS4031-06W
■Motor 550-class G14L motor with water-cooling jacket
■Battery 7.2V-2200mAh NiMH
■Compatible battery size L148xW52xH30mm or less
■Charger Ni-MH battery dedicated USB charger
■Propeller D31xP1.4 (Polycarbonate)
■Maximum speed 24km/h approx.
■Operation time 5 min approx.

Spare parts for the Fazer Mk2 Touring Car