There are 10962 products.
Futaba R203GF (S-FHSS) 2.4G...
S-FHSS/FHSS (Auto Detection)
SIZE:
39 mm x 26 mm x 10 mm
1.54 in x 1.02 in x 0.39 in
WEIGHT:
8 g
0.28 oz
OPERATING VOLTAGE:
DC 4.8V-7.4V
TZ005 "Flying Doraemon"
●Body size: φ110 (including rotor) x H89 (mm)
●"Doraemon" body size: W48.8 x H58 x D39.3 (without rotor) (mm)
●Body weight: 19g
●Transmitter size: W116 x H89 x D36 (mm)
Package size: W185 x H245 x D118 (mm)
Target age: 10 years old and over
● "Flying Doraemon" body
● Transmitter
● Instruction manual
● USB cable
● Spare parts Rotor (1 set)
● Paper display stand
2014 Dodge Dart Light...
- Available in Genuine .025" or .030" Lexan®
- Stable, neutral handling
- Bold Dodge® Dart styling
- Officially Licensed Product
- Proudly made in the U.S.A.
IFW636 3PC HD LW Aluminum...
Option part for the INFERNO MP10, MP10 TKI2, and MP10T.
Lower weight than the existing aluminum clutch shoes, but stronger acceleration with the refined engagement surface.
Two types of clutch springs, Φ0.9 and Φ0.95 are available for a wider range of clutch settings.
MZP241BLY ASC MR03W-MM...
※It is not possible to drive with auto scale alone. In addition, some bodies cannot be mounted depending on the chassis.
※The optional part No. MZW411B friction damper set cannot be installed because it interferes with a part of the body.
97054-4HR LED Light Unit...
2 light halogen LED and 2 light red LED light set. Connects to the Rx open slot and includes extention cords for additional light sets.
IFW339B 3PC HD Aluminum...
Compared to conventional 3pc clutch shoes, durability is greatly improved More accurate for clutch on & off by material change. ※Option parts for INFERNO series.
HT-RC C150 10A AC/DC RC...
TITLE:C150 BALANCE CHARGER
MODEL:HT-0097
SPECIFICATIONS
Charge power:AC/DC Input150W
Discharge power:10W
Charge current range:0.1-10A
Discharge current range:0.1-2A
Lilon/LiPo/LiFe/LiHV cell count :1-6cells
NiCd/NiMH battery cell count:1-15cells
PB Battery voltage:2-20V
Smart battery:I/II/III
Current drain for balancing: 500mA/cell
34429T1 1/10 RC EP 4WD...
■Length 460mm
■Width 201mm(Body width * Excluding mirrors)
■Height 140mm
■Chassis Height 7mm(approx.)
■Wheelbase 260mm
■Tread (F/R) 167mm
■Tires (F/R) φ64×27.7mm
■Gear Ratio 6.54:1
■Weight 1,650g (approx.)
■R/C system &; Syncro KT-231P+
■Motor G14L
<Kit Contents>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts
<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools
MZW38-20B MINI-Z Racing...
Unidirectional edge pattern high-grip tires. Realizes exceptional grip, not just on urethane, but also on carpet surfaces.
■MZW38/10 / MZW38-20 / MZW38-30 / MZW38-40