There are 116 products.
Active filters
PL2207 LIPO GLOW IGNITOR...
1. High-tech regulator application, output voltage is 1.5V
2. Switching transfer with low heat dissipation
3. Large LCD shows battery status
4. Including Li-Po 1S 1200mAh battery (easily charged with additional micro USB lead)
5. Convenient, economical, pistol-sized design
6. Fits any glow plugs within new 4-cycle plugs
LRP430421 ANTIX by LRP 5900...
Technical data
Voltage - 7.4V
C-rate - 50C
Style - Hardcase
Connector - T-Plug
Balancing connector - XH
Length - 138.00mm
Width - 46.00mm
Height - 25.00mm
Weight - ~310g
Capacity - 5900mAh
LRP431271 HV LCG MODIFIED...
Technical data
PL1652B FAST FUELLER HAND...
1. New generation fuel pump with compact size
2. Double injection; using TPR material that has a comfortable feel
3. Improved gear mesh and make the large flow rate 18cc/sec
4. Advanced pump unit design; glow fuels and gasoline are both compatible
5. Includes filter fuel nozzle and 19” silicon fuel tubing
PL1305A INTERCHANGEABLE HEX...
INTERCHANGEABLE HEX DRIVER SET
(1.5; 2.0; 2.5; 3.0mm)
PL1322 INTERCHANGEABLE...
INTERCHANGEABLE DRIVER SET:
(HEX : 1.5; 2; 2.5; 3)
(PHILLIPS : PH#1 F4; PH#2 F5)
(FLAT : 4.0 x 0.7mm)
LRP71145 LRP 5000MAH 7.2V...
Features
- High-Power Racing Stickpack
- Higher cycle capability
- Improved quality and more power
- Best value for money
- Ready-to-use complete with US-style connectors
- Fast charge enabled
- Exclusive LRP single cells
- Large application area
- 2.5mm² silicone power wire
- Tested LRP quality, e.g. endurance-tested over 400 continuous charge and discharge cycles
34492T1 1970 Dodge Charger...
■Length 507mm
■Width 195mm(Body width:210mm)
■Height 128mm
■Chassis Height 15mm(approx.)
■Wheelbase 274mm
■Tread (F/R) 167mm
■Tires (F/R) Fφ64×27.7mm
■Gear Ratio 6.54:1
■Weight 1680g (approx.)
■R/C system Syncro KT-231P+
■Motor TORX10E
<Kit Content>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts
<Require to run>
<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools
LRP431272 HV HYPER LCG...
TECHNICAL DATA
Cell chemistry - LiPo HV
C-rate - 120C/60C
Length - 139.0mm
Width - 47.0mm
Height - 17.5mm
Weight - 215g (+/-4%)
Connectors - 5mm
Homologated - ROAR, EFRA, BRCA
SWSGS02 SGS-02 Gyro SXR...
・AL case
・Compatible with SXR
・New Function: Quick-ST
・Compatible with setting by MULTI-SETTING GEAR
VTEC LIPO 2500 RX-P 7.4V
Weight-90g
Nominal voltage-7.4V
C-rate-RX-only
Dimensions-84x30x17mm
Capacity-2500
Balancing connector-XHR 3-pole
32294 MINI-Z Buggy VE2.0 SP...
■Length 163mm
■Width 105mm
■Height 46mm
■Wheelbase 115mm
■Tread(F/R) 89mm/89mm
■Tires(F/R) φ37×13.5mm/φ37×18.5mm
■Weight 200g approx.
■Motor SPEED HOUSE XSPEED 85 (8500KV)
<Set Contents>
●Factory assembled MB-010VE chassis installed with XSPEED VE brushless motor.
●Pinion gears x 3 (11T, 13T, 15T)
●Spur gears x 2 (33T, 35T)
●Wheel wrench
●Pinion gear tool
●Pairing stick
●Spare wheel nuts
<Required for Operation>
●KT531P transmitter
●Paint for body
●4 x AAA alkaline or Ni-MH batteries for chassis
●4 x AAA alkaline batteries for transmitter (EX-5UR ASF requires 8 x AA alkaline batteries)
34494T1 1970 Chevy®...
■Length 490mm
■Width (Body width * excluding mirror) 208mm
■Height 138mm
■Chassis Height 15mm(approx.)
■Wheelbase 274mm
■Tread (F/R) 167mm
■Tires (F/R) φ64×27.7mm
■Gear Ratio 6.54:1
■Weight 1680g (approx.)
■R/C system Syncro KT-231P+
■Motor TORX10E
<Kit Content>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts
<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tool
LRP430410 ANTIX BY LRP 9000...
TECHNICAL DATA
Nominal voltage - 7.6V
C-rate - 45C
Style - Hardcase
Connector - US-Style
Balancing - connectorXH
Application - On/Offroad
Length - 137mm
Width - 47mm
Height - 25mm
Weight - 352g
Capacity - 9000mAh
34471T1 Toyota Supra (A80)...
■Length 455mm
■Width(Body width) 200mm(210mm)
■Height 120mm
■Wheelbase 260mm
■Tread (F/R) F:174mm/R:174mm
■Tires (F/R) F:φ64×24.2mm/R:φ64×24.2mm
■Gear Ratio 6.54:1
■Weight 1650g(approx.)
■Syncro KT-231P+ transmitter
■Motor G14L
PL1652R FAST FUELLER HAND...
1. New generation fuel pump with compact size
2. Double injection; using TPR material that has a comfortable feel
3. Improved gear mesh and make the large flow rate 18cc/sec
4. Advanced pump unit design; glow fuels and gasoline are both compatible
5. Includes filter fuel nozzle and 19” silicon fuel tubing
LRP430408 ANTIX BY LRP 6400...
The very first Antix by LRP product gets an update. Already known from high-end Competition LiPo batteries, the HV-LiPo GRAPHENE battery cell technology now also gained entry into our high-quality budget Antix by LRP LiPo battery line.
The Antix by LRP GRAPHENE cells enable charging up to 8.7V (2S), greatly increasing the power output and runtime. The batteries are still fully compatible to all 8.4V
chargers. If you are charging them only to 8.4V two good things will happen to you. Firstly, the batteries will have a highly improved lifetime. Secondly, the batteries will still have a significantly higher power output at 8.4V charging compared to the 2016 line without GRAPHENE cells.
LRP430413 ANTIX BY LRP 3100...
LiPo power at a budget price from ANTIX by LRP.
These RC car LiPos are ideal for hobby and amateur drivers looking for power and durability at a budget price.
The special "stickpack" shape is based on the NiMh packs for which many chassis were designed.
Also for the new release of vintage models you get perfectly fitting batteries of the latest technology with 134mm length and additionally slightly offset cable exit, so the battery posts of your chassis do not get in the way.
Equipped with a robust hard case, these 2S LiPo batteries are suitable for tough On- and Offroad use.
34491T1 MAD VAN VE 1:10...
■Length 460mm
■Width 323mm
■Height 197mm
■Wheelbase 274mm
■Tread (F/R) F:250mm/R:250mm
■Tires (F/R) F:φ110×70mm/R:φ110×70mm
■Gear Ratio 11.803:1
■Weight 2180g (approx.)
■R/C system Syncro KT-231P+
■Motor TORX10E (3652 kv4000)
32893G MINI-Z Racer...
※The user manual is not included with this product. You can download the user manual from the following link.
<Kit Content>
●MR-04 EVO2-W-MM Factory assembled chassis with KYOSHO SPEED HOUSE KV8500 brushless motor
●Parts set for changing front tread
●6T・7T・8T・9T Pinion gears
●Wheel wrench
●Tools for pinion gears
●Spare wheel nuts
<Required for Operation>
●Transmitter
●Receiver unit (Compatible with EVO/EVO2)
●ASC
●AAA x 4 batteries for chassis
●Batteries for transmitter
LRP430411 ANTIX BY LRP 4200...
FEATURES
- HV-LiPo GRAPHENE cells - New, high power LiPo cells that can be charged up to 8.70V (2S)! Maximum Power!
- 100% compatible for 8.40V (2S) charging - More Power than our 2016 batteries at 8.40V charging!
- 3C Charge current
- 45C LiPo Power - No memory effect, extremely long lifetime
- Perfect tuning option for your RTR car
- Improved Lifetime - Highly improved lifetme when charged to 8.40V (2S) only!
- Best value for money
- No memory effect, extremely long lifetime
- Tested according to latest UN test standards
- Durable hardcase made of high-quality synthetic material for maximum safety
- High-Power LiPo Packs
LRP431285 HV STOCK SPEC...
TECHNICAL DATA
LRP430356 LIPO 3200 TX-PACK...
Power for the Sanwa MT-44! This Transmitter battery offers highest Performance. The VTEC LiPo TX-Pack is a true transmitter battery for Transmitters. Its dimensions perfectly match the size of the battery tray.
LRP431281 LRP HV LCG STOCK...
Ideal weight for 1/10 TC racing combined with Low Center of Gravity design.
HV-LiPo Perfect car balance and power for tight tracks.
TECHNICAL DATA
LRP430405 ANTIX BY LRP 5200...
TECHNICAL DATA
LRP41410EU PULSAR SPORT...
Meet the small brother of the successful Pulsar Pro charger. The Pulsar Sport has everything that you need for your battery management. The integrated power supply allows you to directly connect it either to
a AC wall socket or to DC sources like car batteries. You don’t need a separate power supply anymore.
Of course, the currently highly sought after HV LiPo battery packs with up to 8.7V (2S) charging are no problem for the Pulsar Sport. It supports LiPo HV charging, making it fully prepared for any future tasks.
Like with all current LRP chargers, the Pulsar Sport also offers a USB charge port (5V/1.0A) that is suitable for smartphones and MP3 players.
