●Body size: φ110 (including rotor) x H89 (mm)
●"Doraemon" body size: W48.8 x H58 x D39.3 (without rotor) (mm)
●Body weight: 19g
●Transmitter size: W116 x H89 x D36 (mm)
Package size: W185 x H245 x D118 (mm)
Target age: 10 years old and over

● "Flying Doraemon" body
● Transmitter
● Instruction manual
● USB cable
● Spare parts Rotor (1 set)
● Paper display stand

※It is not possible to drive with auto scale alone. In addition, some bodies cannot be mounted depending on the chassis.
※The optional part No. MZW411B friction damper set cannot be installed because it interferes with a part of the body.

* You cannot drive with the auto scale alone. In addition, some bodies cannot be mounted due to the chassis.
* The optional part No. MZW411B friction damper set cannot be installed because it interferes with a part of the body.

※It is not possible to drive with auto scale alone. In addition, some bodies cannot be mounted depending on the chassis.
※The separately sold LED light unit set (No.MZW429R) cannot be installed on the Toyota CELICA TURBO 4WD No.2 WRC 1992.

※It is not possible to drive with auto scale alone. In addition, some bodies cannot be mounted depending on the chassis.
※The separately sold LED light unit set (No.MZW429R) cannot be installed on the Porsche 962 C Coupe LH No.7 LM 1987.

※It is not possible to drive with auto scale alone. In addition, some bodies cannot be mounted depending on the chassis.
※The separately sold LED light unit set (No.MZW429R) cannot be installed on the Audi R8 LMS 2016 “Gray/Red”.

※It is not possible to drive with auto scale alone. In addition, some bodies cannot be mounted depending on the chassis.
※The separately sold LED light unit set (No.MZW429R) cannot be installed on the Audi R8 LMS Phoenix Racing NBR 2010 #98.

*Autoscale alone cannot run. Also, some bodies cannot be mounted on certain chassis.
*The separately sold LED light unit set (No. MZW429R) can be installed on the Toyota Sprinter Trueno AE86.

※This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.
※The separately sold LED light unit set (No.MZW429R) can be installed on the NISSAN Fairlady 240Z-L Tuned Ver.

※This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.
※The separately sold LED Light Unit Set (No. MZW429R) can only be installed on the front of the McLaren 12C GT3 2013.

※This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.
※The separately sold LED light unit set (No.MZW429R) can be installed on the NISSAN Fairlady 240Z-L Tuned Ver.

*The Auto Scale body alone is not drivable. Additionally, some bodies may not fit certain chassis.
*The separately sold LED light unit set (No.MZW429R) can be installed on the Toyota Corolla Levin AE86.

*The Auto Scale body alone is not drivable. Additionally, some bodies may not fit certain chassis.
*The separately sold LED light unit set (No.MZW429R) can be installed on the Toyota Corolla Levin AE86.

* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.

●Scale: Approximately 1/28 scale
●Product size：L181 x H46 x D71（mm）
●Product weight：109g (approx.)
●Package size：W215 × H225 × D115（mm）
●Package weight：433g (approx.)
●Maximum speed: Training mode: 7km/h Racing mode: 10km/h
●Operation distance: approx. 30m
●Frequency: 2.4GHz (12 vehicles can run simultaneously)
●Continuous running time: Approximately 60 minutes (when using new alkaline batteries)
●Target age: 6 years old or older

<Kit Content>
●Main unit
●2.4GHz controller with stopwatch
●Mini pylons (6 pieces)
●Trim adjuster
●Battery holder

<Required to run>
●AAA-size alkaline batteries x 2 for chassis (sold separately)
●AAA-size alkaline batteries x 2 for transmitter (sold separately)

※This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.
※The separately sold LED light unit set (No.MZW429R) can be installed on the NISSAN SKYLINE GT-R R32 V-SPECⅡ.

Exquisite finish and realistic appearance. A complete body series that can be enjoyed as a high-quality display that provides the joy of decorating.
* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.

※This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.
※The separately sold LED light unit set (No.MZW429R) cannot be installed on the NISSAN SILVIA S15 equipped with GT Wing White.

* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.

* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.

Exquisite finish and realistic appearance. A complete body series that can be enjoyed as a high-quality display that provides the joy of decorating.
* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.

＜適合車種＞
■MINI-Z MR-03W-MM
＜仕　　　様＞
■Wheel Base：LL（98mm）
■Wheel Off Set：F：N+1.5 / R：W+1.5
■Wheel Width：F：8.5mm / R：11mm

＜適合車種＞
■MINI-Z MR-03W-MM
＜仕　　　様＞
■Wheel Base：LL（98mm）
■Wheel Off Set：F：N+1.5 / R：W+1.5
■Wheel Width：F：8.5mm / R：11mm

* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.

* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.

※It is not possible to drive with auto scale alone. In addition, some bodies cannot be mounted depending on the chassis.
※The separately sold LED light unit set (No.MZW429R) cannot be installed on the McLaren Senna GTR.

Exquisite finish and realistic appearance. A complete body series that can be enjoyed as a high-quality display that provides the joy of decorating.
* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.

* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.

* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.

Exquisite finish and realistic appearance. A complete body series that can be enjoyed as a high-quality display that provides the joy of decorating.
* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.

■Length 660mm
■Width 160mm
■Height 325mm
■Weight 1,530g approx.
■Motor 550-class G14L motor with water-cooling jacket
■propeller Size D31 x P1.4 (polycarbonate)
■Maximum Speed 21km/h approx.
■Operation time 5 minutes 30 seconds approx.

＜ Kit Contents ＞
●Pre-colored surf board installed with R/C system, complete with linkages
●Complete pre-painted surfer figure
●KT-231P+2.4GHz 2ch pistol grip type transmitter
●7.2V-22HV NiMH battery
●Ni-MH battery dedicated delta peak USB charger
●Styrofoam slipway
●Spare ladder

＜ Required for Operation ＞
●AA batteries x 4 for transmitter

■Length 595mm
■Width 220mm
■Height 350mm
■Weight 1,600g approx.
■Transmitter KT-231P+
■ESC KYOSHO SPEED HOUSE
          KA060-91W
■Servo KS4031-06W
■Motor 550-class G14L motor with water-cooling jacket
■Battery 7.2V-2200mAh NiMH
■Compatible battery size L148xW52xH30mm or less
■Charger Ni-MH battery dedicated USB charger
■Propeller D31xP1.4 (Polycarbonate)
■Maximum speed 24km/h approx.
■Operation time 5 min approx.

■Length 595mm
■Width 220mm
■Height 350mm
■Weight 1,600g approx.
■Transmitter KT-231P+
■ESC KYOSHO SPEED HOUSE
          KA060-91W
■Servo KS4031-06W
■Motor 550-class G14L motor with water-cooling jacket
■Battery 7.2V-2200mAh NiMH
■Compatible battery size L148xW52xH30mm or less
■Charger Ni-MH battery dedicated USB charger
■Propeller D31xP1.4 (Polycarbonate)
■Maximum speed 24km/h approx.
■Operation time 5 min approx.

*Autoscale alone cannot run. Also, there are some bodies that cannot be mounted on the chassis.

●Scale approx. 1/28
●Product size: L164 x D73 x H45 (mm) ● Body
weight: approx . Mode: 7km/h / Racing mode: 10km/h ●Operable distance: approx. 30m ●Frequency: 2.4GHz (12 units can run simultaneously) ●Continuous running time: approx. 60 minutes (when using new alkaline batteries) ●Target age: 6 years old that's all

KIT CONTENTS

■Length 270mm
■Width 98mm
■Height 190mm
■Wheelbase 185mm
■Tire(F/R) Φ78×18mm／Φ86×23mm
■Gear Ratio 13.80：1～19.30：1
■Weight 750g  (approx.)
■Motor Le Mans DM20

<Kit Content>
●Chassis kit
●Pinion gear (10T, 12T, 14T)

<Required to run>
●2ch R/C system
●Batteries for transmitter
●servo×1 (Recommended: NoGPW20)
●ESC×1 (Recommended: No.GPW17)
●Battery for chassis（7.2V-1600mAh Ni-MH)
●Charger for battery 
●Charger Convert Connector
●Grease（Recommended:No.96508)
●Paint
●Tool

※It is not possible to drive with auto scale alone. In addition, some bodies cannot be mounted depending on the chassis.
※The separately sold LED light unit set (No.MZW429R) cannot be installed on the McLaren 720S GT3.

※It is not possible to drive with auto scale alone. In addition, some bodies cannot be mounted depending on the chassis.
※The separately sold LED light unit set (No.MZW429R) cannot be installed on the McLaren 720S GT3.

●Scale: Approximately 1/28 scale
●Product size：L183 x H76x D82（mm）
●Product weight：144g (approx.)
●Package size：W215 × H225 × D115（mm）
●Package weight：407g (approx.)
●Maximum speed: Training mode: 7km/h Racing mode: 10km/h
●Operation distance: approx. 30m
●Frequency: 2.4GHz (12 vehicles can run simultaneously)
●Continuous running time: Approximately 60 minutes (when using new alkaline batteries)
●Target age: 6 years old or older

<Required to run>
●AAA-size alkaline batteries x 2 for chassis (sold separately)
●AAA-size alkaline batteries x 2 for transmitter (sold separately)

●Scale: Approximately 1/28 scale
●Product size：L160 x H50.5 x D73.9（mm）
●Product weight：109g (approx.)
●Package size：W215 × H225 × D115（mm）
●Package weight：Approximately 343g
●Maximum speed: Training mode: 7km/h Racing mode: 10km/h
●Operation distance: approx. 30m
●Frequency: 2.4GHz (12 vehicles can run simultaneously)
●Continuous running time: Approximately 60 minutes (when using new alkaline batteries)
●Target age: 6 years old or older

<Kit Content>
●Main unit
●2.4GHz controller with stopwatch
●Mini pylons (6 pieces)
●Trim adjuster
●Battery holder
●Seal

<Required to run>
●AA-size alkaline batteries x 2 for chassis (Not included)
●AA-size alkaline batteries x 2 for transmitter (Not included)

*Autoscale alone cannot run. Also, some bodies cannot be mounted on certain chassis.
*The separately sold LED light unit set (No. MZW429R) can be installed on the HKS Skyline (R32 GT-R) 1993 #87.

■Scale: Approximately 1/28 scale
■Total length: 130mm
■Total width: 70mm
■Total height: 35mm
■Weight: Approximately 110g (excluding AA alkaline batteries)
■Maximum speed: Training mode: 7km/h Racing mode: 10km/h
■Operating distance: Approximately 30m
■Frequency: 2.4GHz (12 units can run simultaneously)
■Continuous running time: Approximately 60 minutes (when using new alkaline batteries)
■Recommended age: 6 years old and above

<Set contents>
● First Minute main unit
● 2.4GHz controller with stopwatch
● Mini pylon (6 pieces)
● Sticker
● Trim adjuster
● Battery holder

<Required to run>
Main unit: 2 AA alkaline batteries
Transmitter: 2 AA alkaline batteries

■Scale: Approximately 1/28 scale
■Total length: 130mm
■Total width: 70mm
■Total height: 35mm
■Weight: Approximately 110g (excluding AA alkaline batteries)
■Maximum speed: Training mode: 7km/h Racing mode: 10km/h
■Operating distance: Approximately 30m
■Frequency: 2.4GHz (12 units can run simultaneously)
■Continuous running time: Approximately 60 minutes (when using new alkaline batteries)
■Recommended age: 6 years old and above

<Set contents>
● First Minute main unit
● 2.4GHz controller with stopwatch
● Mini pylon (6 pieces)
● Sticker
● Trim adjuster
● Battery holder

<Required to run>
Main unit: 2 AA alkaline batteries
Transmitter: 2 AA alkaline batteries

■Scale: Approximately 1/28 scale
■Total length: 130mm
■Total width: 70mm
■Total height: 35mm
■Weight: Approximately 110g (excluding AA alkaline batteries)
■Maximum speed: Training mode: 7km/h Racing mode: 10km/h
■Operating distance: Approximately 30m
■Frequency: 2.4GHz (12 units can run simultaneously)
■Continuous running time: Approximately 60 minutes (when using new alkaline batteries)
■Recommended age: 6 years old and above

<Set contents>
● First Minute main unit
● 2.4GHz controller with stopwatch
● Mini pylon (6 pieces)
● Sticker
● Trim adjuster
● Battery holder

<Required to run>
Main unit: 2 AA alkaline batteries
Transmitter: 2 AA alkaline batteries

※It is not possible to drive with auto scale alone. In addition, some bodies cannot be mounted depending on the chassis.

※It is not possible to drive with auto scale alone. In addition, some bodies cannot be mounted depending on the chassis.
※The separately sold LED light unit set (No.MZW429R) cannot be installed on the ASC MR-03W-LM Sauber-Mercedes Gruppe-C-Rennsportwagen C9, Nr.63, LM 1989.

■Length 165.0mm
■Width 71.0mm
■Height 50.0mm
■Wheelbase 94.0mm（L）
■Tread F : 59.5mm R : 59.5mm
■Chassis MA-020-N
■Front Wheel Offset Narrow +1.5mm
■Rear Wheel Offset Narrow +1.5mm
■R/C System Syncro KT-531P

<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 165.0mm
■Width 71.0mm
■Height 50.0mm
■Wheelbase 94.0mm（L）
■Tread F : 59.5mm R : 59.5mm
■Chassis MA-020-N
■Front Wheel Offset Narrow +1.5mm
■Rear Wheel Offset Narrow +1.5mm
■R/C System Syncro KT-531P

<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Overall length 180.0mm
■Overall width 78.0mm
■Overall height 40.0mm
■Wheelbase 102.0mm (3L) ■
Tread Wide
■Chassis used RWD (MR-03)
■Motor mount LM
■Front wheel offset Narrow +1.5mm
■Rear wheel offset Wide + -0.0mm
■Used radio Syncro KT-531P

<Ready set contents>
●Factory-assembled chassis
●Factory-assembled plastic body with painting and markings
●Syncro KT-531P 2.4GHz transmitter
●Set of parts for changing front tread ●Front
suspension spacer for adjustment
●6T/7T/8T/9T pinion gear
●Wheels Wrench
● Pinion removal tool
● Spare wheel nut
● Pairing stick
● Tire and wheel included

<Things required for driving>
●4 AAA alkaline batteries for running
●4 AAA alkaline or nickel metal hydride batteries for transmitter

■Length 182.0mm
■Width 78.0mm
■Height 43.0mm
■Wheelbase 98.0mm （LL）
■Tread F:66.5mm R:65.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +2.5mm(for RWD)
■Rear Wheel Offset Wide +3.0mm(for RWD)
■Weight 130g
■R/C System Syncro KT-531P

<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels

<Required for Operation>
●AAA-size alkaline batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for transmitter

■Length 165.0mm
■Width 70.0mm
■Height 46.0mm
■Weight 193g
■Wheelbase 94.0mm（L）
■Tread F : 59.5mm R : 59.5mm
■Chassis MA-020-N
■Front Wheel Offset Narrow +1.5mm
■Rear Wheel Offset Narrow +1.5mm
■R/C System Syncro KT-531P

<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 163.0mm
■Width 67.0mm
■Height 51.0mm
■Wheelbase 94.0mm（L）
■Tread F : 56.5mm R : 56.5mm
■Chassis MA-020-N
■Front Wheel Offset Narrow +-0.0mm
■Rear Wheel Offset Narrow +-0.0mm
■R/C System Syncro KT-531P

<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 163.0mm
■Width 67.0mm
■Height 51.0mm
■Wheelbase 94.0mm（L）
■Tread F : 56.5mm R : 56.5mm
■Chassis MA-020-N
■Front Wheel Offset Narrow +-0.0mm
■Rear Wheel Offset Narrow +-0.0mm
■R/C System Syncro KT-531P

<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 175.0mm
■Width 72.8mm
■Height 52.0mm
■Weight 180g
■Wheelbase 90.0mm（M）
■Tread F : 56.5mm R : 56.5mm
■Chassis MA-020-N
■Front Wheel Offset Narrow +-0.0mm
■Rear Wheel Offset Narrow +-0.0mm
■R/C System Syncro KT-531P

<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 175.0mm
■Width 72.8mm
■Height 52.0mm
■Weight 180g
■Wheelbase 90.0mm（M）
■Tread F : 56.5mm R : 56.5mm
■Chassis MA-020-N
■Front Wheel Offset Narrow +-0.0mm
■Rear Wheel Offset Narrow +-0.0mm
■R/C System Syncro KT-531P

<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.

■Length 181.2mm
■Width 78.0mm
■Height 47.75mm
■Wheelbase 98.0mm （LL）
■Tread F:66.5mm R:65.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +2.5mm(for RWD)
■Rear Wheel Offset Wide +3.0mm(for RWD)
■R/C System Syncro KT-531P

<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels

<Required for Operation>
●AAA-size alkaline batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for transmitter

■Length 173.0mm
■Width 78.0mm
■Height 45.0mm
■Wheelbase 98.0mm （LL）
■Tread F:67.5mm R:65.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +3.0mm(for RWD)
■Rear Wheel Offset Wide +3.0mm(for RWD)
■Weight 169g
■R/C System Syncro KT-531P

<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels

<Required for Operation>
●AAA-size alkaline batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for transmitter

■Length 173.0mm
■Width 78.0mm
■Height 45.0mm
■Wheelbase 98.0mm （LL）
■Tread F:67.5mm R:65.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +3.0mm(for RWD)
■Rear Wheel Offset Wide +3.0mm(for RWD)
■Weight 169g
■R/C System Syncro KT-531P

<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels

<Required for Operation>
●AAA-size alkaline batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for transmitter

■Length 155.0mm
■Width 70.0mm
■Height 50.0mm
■Wheelbase 90.0mm（M）
■Tread F : 57.5mm R : 57.5mm
■Tire F : Φ25.0mm×8.5mm R : Φ25.0mm×8.5mm
■Gear ratio 7.23、6.38、5.71、5.97、5.34、4.97、4.5：1
■Front Wheel Offset Narrow +0.5mm
■Rear Wheel Offset Narrow +0.5mm
■R/C System Syncro KT-531P
■Weight 193g

<Readyset Contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter