List of products by brand Kyosho
There are 2511 products.
82043 MINI-Z EVO Receiver...
MD201SPB SP Main...
Main chassis for MA-020/VE installed with gold plated terminals for superior conductivity.
FA535-S20 Pinion Gear S20T...
Spare parts for Mad Bang. This product must be used in combination with FA535-76 Spur Gear 76T FZ02L-B when using EZTH001BKS tires for Rage 2.0.
FAW230 1:10 Scale Radio...
~ for the full rally experience ~
Rally conversion set for the Fazer MK2 touring cars with short wheelbase. Longer suspension stroke allows off-road driving. Includes longer shocks, shock towers and related parts. Does not come with tire and wheels.
OTB248B Non-Decoration Body...
Spare parts for the TURBO OPTIMA.
Optional parts for the OPTIMA and JAVELIN.
OTT244MB Block Tire...
Optional parts for the TURBO OPTIMA.
When use with #OTH245W, it can be used as optional parts for the OPTIMA and JAVELIN.
32346S MINI-Z RWD Series...
■Length 156.0mm
■Width 69.0mm
■Height 47.5mm
■Wheelbase 94.0mm (L)
■Tread F:56.5mm R:56.5mm
■Chassis RWD(MR-03)
■Motor Mount RM
■Front Wheel Offset Narrow +-0.0mm(for RWD)
■Rear Wheel Offset Narrow +-0.0mm(for RWD)
■R/C System Syncro KT-531P
<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels
<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter
66608 First Mini-Z Nissan...
●Scale approx. 1/28
●Product size: L164 x D73 x H45 (mm) ● Body
weight: approx . Mode: 7km/h / Racing mode: 10km/h ●Operable distance: approx. 30m ●Frequency: 2.4GHz (12 units can run simultaneously) ●Continuous running time: approx. 60 minutes (when using new alkaline batteries) ●Target age: 6 years old that's all
KIT CONTENTS
●Main unit
●2.4GHz controller with stopwatch
●Mini pylons (6 pieces)
●Trim adjuster
●Battery holder
WHAT YOU NEED BEFORE RUNNING
● 2 AA alkaline batteries for the First Minute main unit,
● 2 AA alkaline batteries for the controller
GPW12B Special Steering Shock
Greatly suppresses vibration and instability of steering control. Increases stability during high speed cornering, acceleration and braking.
32530MB MINI-Z 4×4 Series...
■Length 193mm
■Width 84mm
■Height 90.0mm
■Chassis Type MX-01
■Wheel Base 120mm
■Tread F/R:72.7mm
■Weight 242g (excl. battery)
■Motor/Engine 130 Class
■Gear Ratio 55.44:1/46.20:1/39.60:1
39.60:1/34.65:1/34.65:1
■Front Tire Diameter Φ37.0mm
■Rear Tire Diameter Φ37.0mm
■Front Tire Width 12mm
■Rear Tire Width 12mm
■Battery 4 x AAA Alkaline
■Transmitter Syncro KT-531P
■Speed:Approx. 2.7km/h〜5.4km/h (Pinion gears 10T〜 20T)
■Running Time Approx. 60 mins
<Kit Content>
●Complete chassis with built-in electronics.
●Factory-painted body complete with many fine details
●KT-531P 2.4GHz transmitter
●Pinion gear set(10T、12T、14T、16T、18T、20T)
●3 types of pinion gear spacers
OTW141 HD Upper Deck...
CNC machined 2mm thick carbon upper deck. Achieves increased strength and weight reduction of approximately 5g compared to normal FRP products.
OTT244S Block Tire...
Option parts for the TURBO OPTIMA.
Soft compound of 50mm tire. For low grip road surface
MBW015RC Aluminum Front...
74031-14 Back...
Back plate for the KE21 SP / KE25SP / KE25SP2 engine. Back plate elimintes the pull start allowing the use of starter boxes. Less friction allows more performance.
34491T1 MAD VAN VE 1:10...
■Length 460mm
■Width 323mm
■Height 197mm
■Wheelbase 274mm
■Tread (F/R) F:250mm/R:250mm
■Tires (F/R) F:φ110×70mm/R:φ110×70mm
■Gear Ratio 11.803:1
■Weight 2180g (approx.)
■R/C system Syncro KT-231P+
■Motor TORX10E (3652 kv4000)
IFW501 Battery Spacer(For...
Optional parts for INFERNO MP10e. Battery spacer for short LiPo batteries.
It is getting popular to use the shorty LiPo batteries to 1/8 EP Buggy due to the improved performance. The battery can be changed the installing position in the battery holder to adjust a center of gravity and balance as well as making weight reduction. That are advantage to use with the shorty LiPo battery. When use the shorty battery to MP10e, it has same effect for car. It can also be used with vintage Scorpion, Beetle and Fazer series.
EFW002 Carbon Gear...
Lightweight Carbon Rear Shaft for the FANTOM EP 4WD. Improves throttle response by lighter rotating parts. The screw part at tip of differential side is assembled with aluminum parts by factory. Recommended to use with EFW003.
IFS004-1014 Big Shock...
95mm Shock Spring for INFERNO MP10/MP10T/MP10e/MP9. It is necessary for Buggy to use together with IFW624 HD Rear Shock Stay.
MDW303 Setting Tie Rod...
Tie-rod set for the MA-03F/MA-030. Provides four steps of toe angle setup for each narrow and wide configuration.
66003HGC DUMP TRUCK KOMATSU...
<Readyset Contents>
●Fully assembled and painted chassis
●3ch transmitter
<Required for Operation>
●1 x PP3 9V alkaline battery for transmitter
●4 x AAA alkaline batteries for model
IFW622 Steel Diff Bevel...
Optional parts for the INFERNO MP9/MP10.
Allows to change the inside center differential gear ratio from 10T/20T to 12T/18T.
By changing the differential effect, improve running stability on bumpy track
Increased a setting variety.
IFW618 Ring Gear (42T/MP10)
Option parts for INFERNO MP9/MP10 series. Necessary to use together with IFW618 and IFW619 as a set. Improves the throttle feeling to change the secondary reduction ratio (43T / 13T → 42T / 12T).
OT251 Aluminum Roll Bar
Spare parts for Javelin. Compatible with the Optima to use the Javelin roll cage body.
MZW122BK MINI-Z Pit Mat...
Pit mat with cool MINI-Z logos.
Great for maintanance of your MINI-Z while keeping the pit table clean.
Soft and grippy PVC material avoids small parts to fall off the table.
Size: 24 in. x 17 in. (approx 600 x 430mm).
IFW603 3PC Clutch Set...
Option parts for the INFERNO MP9 / MP10.
Whole set for clutch parts. Easy to purchase some necessary clutch parts when preparing the spare engine.
OTW109 Carbon Rear Shock...
Light weight 2.5mm carbon fiber shock tower. Compared to the stock aluminum shock tower the carbon fiber shock tower is much lighter and with the same durability
OTW105 Carbon Front Side...
Light weight 2.0mm carbon fiber side plates. 5g lighter without compromising the durability.
OTW103 Carbon Rear Plate L...
Light weight 2.5mm carbon fiber plate. Same durability as the stock plates but 5g lighter.
OTH245BK 8 Holes Wheel...
Optional parts for the TURBO OPTIMA.
Color variation of 50mm wheel.
When use with #OTT244M, it can be used as optional parts for the OPTIMA and JAVELIN.
FAW225 TC Aluminum Shock Set
Aluminum shock set for Fazer MK2 TC chassis.
Includes 2pcs soft springs of #FAW224.
Allows a stable damping force than plastic shocks and fine setting is available with smooth function.
Dial type of height adjustment applys for various range of road surface conditions.
37032B LE MANS 240S...
Turns:15.5T
Operating Voltage:1-3S/12.6V
RPM@7.4V:18870
KV(RPM/V):2550
Max Current:38A
Max Power:320W
Efficiency:90%
Weight(g):179
Motor Diameter(mm):35.8
Motor Length(mm):51.2
Shaft Length(mm):15
Shaft Diameter(mm):3.175
MBW030 Stabilizer Set(for...
3 types of wire diameters can be chosen for both front and rear. Provides a wide range of setting options